Jump to content
SAU Community

Twin Turbo 350

TwinTurbo350

By TwinTurbo350,
in R35 GTR

 Share

Recommended Posts

scathing Grand Master

scathing

Posted
Posted
He's here asking for advice and the only thing you guys care about are pics...

Pics = proof of existence.

Hopeless, or cynical?

I call shenanigans.

For the cost of trying to fit a complete R35 drivetrain into a Z33 chassis....you may as well have just bought a complete R35. I could almost understanding fitting a VR38DETT into a Z33 and running it in pure RWD mode, but if you're going to retain the transaxle and AWD there's no pro in putting it in a Z33, and plenty of cons.

I know of a guy in Qld who is building a monster Z33. Drivetrain out of a V35 AWD, and with a properly built VQ. At least the platform for the drivetrain are the same, so the bits mostly fit.

a31lunacy Proficient

a31lunacy

Posted
Posted

its bs no pics no proof too hard a job too soon in the game the big companys in japan wont even touch the thing with a long stick yet not for serious mods anyway but if it is true then i would def look at mating up a holinger or getrag style box with a gearset to the engine as these transmissions are a pain to maintain and i don't think they would last too long under race/track conditions

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • TurboTapin
      new 1.5 LSD issues/concerns

      By TurboTapin · Posted

      My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • MBS206
      NC MX5

      By MBS206 · Posted

      Bunnings would have just handed you your money back on that one!
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...