Jump to content
SAU Community

Aftermarket ECU for RB26DETT

Vovan

By Vovan,
in Engines & Forced Induction

 Share

Recommended Posts

meggala Grand Master

meggala

Posted
Posted

the power fc is very good but you need to use an ecu that some one in russia can tune? other wise there is no point. the good thingabout the the powerfc is it comes with a basic map.

the blitz ecu might be good if you dont have some one to une your car but you wont get the best results.

meggala

Sydneykid Grand Master

Sydneykid

Posted
Posted

Hi Vovan, Power FC standard maps are pretty copnservative so you should have no problems just plugging it straight in. You can then tune from there.

The Motec F&W lambda sensor and display are the best way to tune yourself. That and someone to watch the Commander display. You should also consider the Datalogit software. www.fc-datalogit.co.nz

The advantage of the Motec ECU (M48 up) is you can buy self tune software for it, which is used with the Motec lambda sensor. Connect it up and it tunes itself, closed loop all conditions and loads.

Add up the costs, it may in fact end up cheaper that way.

Hope that helps

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      98 R34GTT 4k engine stumble

      By MBS206 · Posted

      List all of your mods. It sounds like an aftermarket ECU hitting rev limiter. Like a valet mode, or a cold rpm limiter? 
    • tylink720
      "Cheap" bolt on turbo on RB25DET NEO

      By tylink720 · Posted

      @Kapr Haha yeah thats the one. I missed that you had a built up engine, I wouldn't want to run it on there either then. It was good in my situation just to replace the original turbo on a stock engine. @MBS206Yep definitely not a replacement for anything name brand
    • Kapr
      "Cheap" bolt on turbo on RB25DET NEO

      By Kapr · Posted

      You are selling this? I have never bought something from marketplace...i dont know if i trust that enough. And the price is little bit "too" good...
    • Watermouse
      "Cheap" bolt on turbo on RB25DET NEO

      By Watermouse · Posted

      https://www.facebook.com/share/19kSVAc4tc/?mibextid=wwXIfr
    • Kinkstaah
      Airbox for +T

      By Kinkstaah · Posted

      It would be well worth deciding where you want to go and what you care about. Reliability of everything in a 34 drops MASSIVELY above the 300kw mark. Keeping everything going great at beyond that value will cost ten times the $. Clutches become shit, gearboxes (and engines/bottom ends) become consumable, traction becomes crap. The good news is looking legalish/actually being legal is slighly under the 300kw mark. I would make the assumption you want to ditch the stock plenum too and want to go a front facing unit of some description due to the cross flow. Do the bends on a return flow hurt? Not really. A couple of bends do make a difference but not nearly as much in a forced induction situation. Add 1psi of boost to overcome it. Nobody has ever gone and done a track session monitoring IAT then done a different session on a different intercooler and monitored IAT to see the difference here. All of the benefits here are likely in the "My engine is a forged consumable that I drive once a year because it needs a rebuild every year which takes 9 months of the year to complete" territory. It would be well worth deciding where you want to go and what you care about with this car.
×
×
  • Create New...