Jump to content
SAU Community

Fresh Assembled Rb25 Neo Det

97R33MSPEC
 Share

Recommended Posts

97R33MSPEC Proficient

97R33MSPEC

Posted
Posted

Hey all,

after bein messed around by a couple of indeviduals, i have decided to bite the bullet and do the work to get my NEO properly assembled so it can be sold.

ITEM: 60,000K RB25DET NEO. appx engine km's but has been completely freshened up.

CONDITION: engine has been stripped down to the rotating assembly. the main & big end bearings were checked and were like new so not replaced. pistons are in perfect condition and same with all 6 bores. Head was removed and mechined stripped checked and re assembled to block with new genuine headgasket. comes with practically new intake & exhaust gaskets. Timing belt done appx 20,000K's so wasnt replaced as it will still be good for long time.

INCLUDES: Assentially its a complete engine with no bolt on acc's. comes with 2 EXH manifolds, complete NEO Intake manifold. STD solid lift NEO cams, cam covers timing covers and anything else i have for it.

SELLING BECAUSE: Bought to rebuild and put into my r33 but have since then decided not to change my engnie in my car due to financial issues.

Engine is in SE suburbs of victoria but can easily organise postage. PM me if you want any photo's or have any questions.

THIS IS THE CHEAPEST RB25NEO turbo engine you will find ANYWHERE>

grab a bargain.

Contact me on 0423130616 if you have questions

Link to comment
https://www.sau.com.au/forums/topic/262932-fresh-assembled-rb25-neo-det/
Share on other sites
97R33MSPEC Proficient

97R33MSPEC

Posted
  • Author
Posted
can i just take the head for 500? PM me asap. i've been looking at it for years! thanks

sorry mate but ive allready had a bloke in the states asking for the head for $800 aus. if you can find someone who wants all the other stuff for $500 then i will part it out. but 500 for the head isnt enought man, ive just spent a few hundred just on head machining. then the genuine head gasket is wnother 100.

lemme know wat you wanna do.

97R33MSPEC Proficient

97R33MSPEC

Posted
  • Author
Posted
lol, i think i know the guy. he bought an RB25DE head from okinawa rather than RB25DET.

you've got a PM.

not sure where he found the other head but yeah, he got the wrong one.

PM replied too.

97R33MSPEC Proficient

97R33MSPEC

Posted
  • Author
Posted

Anyone interested in the Short engine??? which is the rotating assembly but with no head on it. can sell that for $300 if anyone is interested.

Also have a HKS EXH cam gear. adjustable. $150ono

97R33MSPEC Proficient

97R33MSPEC

Posted
  • Author
Posted

How come people send a PM then never repluy after i try to contact them???

someone buy this engine, i no longer have use for it.

nothing to do mechanically to it, just bolt on your acc's and drop her in the hole.

97R33MSPEC Proficient

97R33MSPEC

Posted
  • Author
Posted

Thanks for your concern on the price mate and i really appreciate you trying to make other forum members think im dodgy. (please sense my sarcasm)

Just for the record and for everyones knowledge, previous thread price was before engine machine work+ New Gaskets from nissan + timing cases &other spares.

Im a mechanic and know what motors in good condition are worth, if your not interested please look somewhere else.

  • 1 year later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • TurboTapin
      new 1.5 LSD issues/concerns

      By TurboTapin · Posted

      My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • MBS206
      NC MX5

      By MBS206 · Posted

      Bunnings would have just handed you your money back on that one!
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...