Jump to content
SAU Community

Recommended Posts

  • Replies 109
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Was good to catch up and see some old faces that haven’t seen for awhile and there was some nice cars out there both locally and interstate. :P

nice to meet you Noddy, I can't remember if I introduced myself on Sunday? talked to you about your new bottom end and sounds like she will be ever quicker

and to call John Siddons an old man and to go back to polishing his exhaust pipe is a big call there mate.... I respect John as a very accomplished and successful driver and a very nice guy, if he says you were driving in a unsafe manner then I would believe him, I also have seen video of your "safe" driving from a vehicle behind you on friday, and I would of warned you too if I was in John's possition, but hey, maybe you should get better tyres?

I guess it's why I like to hang around with my father's acquaintances of the older generation of "been there, accomplished that" than people of my own age group with rather inflated unwarranted egos....

Edited by CameronBNR32

unofficial times, fastest three lap, including standing start, with two flying, no individual lap times were taken by organisers.

Car 81 Mark Berry 3.22:41 (First outright)

Car 12 John Penlington 3.33:72 ( Second outright)

Car 82 Russell Newman 3.37:09 ( Third outright)

Car 79 Mike Whelan 3.37:22

Oh, and some really old model Datsun, built in 1968, a two door convertible, running all stock 1968 2 litre motor in atmo form did a time of 3.40:81, ( 3 second slower then Russell - not too shabby for a 42 y/o car, eh)

Official results to be published on Zed car Club Qld website soon?? hopefully

anyone else want to know any other times?

Anyone get any pics? lets see'em

plenty of incars, a edited dvd of whole event will be for sale via Zed Club Qld website, get in touch with them there to order copies, something like 1500 pics and 15 hours fottage were done by them, and they are going to try to edit it all down to two hours or so? if still pics and video with loud SOUND

car 79 was very fast!! looked good too!!

would love to have seen marks or jp's times on slicks!

the r35 had quite abit more in it , as it laps there on street rubber at about the 1:07's, the 1968 2ltr atmo car getting 3 sec's off me has more to do with my driving skill (or lack of) & caution (as a few cars came together , which was unusual) & my car leaving for targa tomorrow. also think that 3.37.09 was my third & last run which was in the rain!! which makes me happy.

we could tell from the bridge that you wern't pushing the 35 too hard russ. Pity the rain didn't stay away cause you looked like you were going a bit faster every lap.

Best moment of the day was in the first session mark flinging the 34 between the 2 cars that had just had a bit of a bump in turn 1. Im guessing caution isn't part of his vocabulary :P

one thing i found a little odd was the car of the show being awarded to a holden powered vehicle.

not taking anything away from that beautifully prepared car though!

At the presentation night, the winner ofcar of the show?/perpetual award? went to a Nissan 280ZX, owned by kevin james, must admit I never got to see his motor, was it something like an RB30 Nissan engine? or did it have older L28 motor??, saw it driving around town, it had a little trailer being towed, think it contained all his polishing and cleaning stuff! Dunno, maybe check with Ray F, the show/shine organiser on that one.

yeah mark came back in and said he decided not to hang around and wait for them to touch again so he shot by them !! lol

I headed out to morgan park for the first time, glad i wasnt half an hour later or i would have missed the r34!! Coming around the final turn and onto the straight was mind blowing :P

post-4425-1239609977_thumb.jpg

car 79 was very fast!! looked good too!!

would love to have seen marks or jp's times on slicks!

the r35 had quite abit more in it , as it laps there on street rubber at about the 1:07's, the 1968 2ltr atmo car getting 3 sec's off me has more to do with my driving skill (or lack of) & caution (as a few cars came together , which was unusual) & my car leaving for targa tomorrow. also think that 3.37.09 was my third & last run which was in the rain!! which makes me happy.

Aw, don't kid yourself, we know you're a pretty good steerer, and have been for quite a few years now!

the 3.37 was on your second run of the day, ( dry run), in the wet last run you did a cautious 3.43:65, and the old little 68' jobbie did a 3.43:75 in same greasy conditions. Good luck for Targa, and show them what a modern car can really do!

thanks jason

reason i thought it must have been my third run, is i was sure that car 79 had gone quicker than me, but i probably just read the board wrong

cant wait to get down to targa, atleast the conditions are the same here at the moment!!

i took some pictures on my phone of a gorgeous 1200 coupe, i will try and upload.

Was good to catch up and see some old faces that haven’t seen for awhile and there was some nice cars out there both locally and interstate. :)

nice to meet you Noddy, I can't remember if I introduced myself on Sunday? talked to you about your new bottom end and sounds like she will be ever quicker

and to call John Siddons an old man and to go back to polishing his exhaust pipe is a big call there mate.... I respect John as a very accomplished and successful driver and a very nice guy, if he says you were driving in a unsafe manner then I would believe him, I also have seen video of your "safe" driving from a vehicle behind you on friday, and I would of warned you too if I was in John's possition, but hey, maybe you should get better tyres?

I guess it's why I like to hang around with my father's acquaintances of the older generation of "been there, accomplished that" than people of my own age group with rather inflated unwarranted egos....

I had new RE55s. I was never told my driving was unsafe, I was told I was drifting. Infact if the stewards had discussed it in a better manner it would have left a better taste in my mouth. It was more probably how it was approached. I was some yahoo unwanted drifter. lol

Look I'm over it. I have a lot of respect for acomplished drivers, I have not even a quater the driving ability and am not entering a d1ck swinging contest. Its not about that. They went a little too power hungry. My video says it all. Thats my only full session.

Its all good, It's over.

Well done on the results all.

Russ you only just pipped me! ;)

Looking forward to more pics of the weekend, some awesome cars on display.

Michael

I enjoyed the week end! well most of it.

Practice Friday went out on a set of 205/50/15 Ku36 road tyres and was doing consistant 1:14-1:16 laps latter in the day was having issues with power oversteer issues under the bridge and out of corner 5 i think it is the right hander going up to the T just could not get the power down.

So on with the slicks and managed to do 1:12 laps on my first practice. when i came in my dip stick had popped out. so I cleaned up all the oil and got the biggest zip tie i could and tied the dipstick down fueled it up and was ready for what would be the last run of the day and it was! my girlfriend timed my three flying laps at 3:33 with a 1:12, 1:10, 1:11 splits coming out of the T in to the flip flop a bit of smoke started from my left wheel thinking i had a tyre rubbing i backed off, while looking in the rear vision mirror to see what traffic was going to catch me seen a huge cloud of smoke billowing out the rear followed by through the dash and air vents. I'm on fire!!. I came to a stop on the side of the track and was able to put the fire out in one short blast of the extinguisher (very lucky for an oil fire around a turbo and manifold i could almost see through it was that red.

Saterday. Supacheap 9:00am $150 later and a mission in front of me.

between 10am- 2pm i stiped/ inspected and repaired my standard wiring loom and rewired my Power FC and AVCR sensor looms and both sides of the control gear for my spitfire coils . the fire had also melted the silcone and rubber hoses going to the oil catch can and the heater hoses for the incar heating. so i lost all my coolant as well.

was hoping for a test run at the drags but it was canned due to rain.

Sunday and first run out and reveled my fate. No boost control i was limited to the HKS auctuator's 12psi (lucky not a 8psi one) not my normal 17/18psi low boost or 21psi high

so was having trouble geting down below 1:13 flying laps and with a bogged start on nearly every session 1:18 standing my time was a 3:44/45 over and over (wish it was a regularity event)

so a bit dissapointed that i had the potentiol on friday to do 3:37.

Still had a heap of fun out there one of my least and fav runs was the one it started raining. I started along side an old bloke in a red 260z and the bugger got me off the line i then spent a lap and a half sitting behind him trying to find a gap but as he was the one touching panels in front of Marks run i didn't risk it and his was covering the inside line every were, eventually Russ and Brad were catching us i thought if I was to let Russ past he might have more luck. but the rain started and the officials would have loved it as the three of us coming on to the main staight all three of us were clocking up the lock to counter the drift train we were in trying to get a run on the 260z.

Thanks to Dat2Kman for the work you and your team put in to organsising the event.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...