Jump to content
SAU Community

Recommended Posts

Hi guys and girls,

Thinking of selling my GTR before i get to carried away!

I have recently purchased a 1994 GTR Vspec 2 that I am intending on restoring back to as new.

The car is Gun mettal grey however the paint needs a little attention. There is no damage on the vehicle however it could do with a respray if you were picky.

Details of vehicle:

1994 V-spec 2 with All original parts. (such as brembo brakes and all other V-spec parts)

57,000kms showing on clock

Car is original except for the following

Nismo Front and rear strut braces

Nismo gauges

Nismo Oil cap

Nismo Valley cover

Exhaust

HKS hard piping kit

Apexi pods

Oil cooler in the front bar

Boost Gauge

Boost controller (that i have never even touched!)

All parts look as though they were fitted either as new as options or when the car was almost new.

Car goes very very well and engine sounds great (Plenum is still all black.)

Interior is in good condition with no rips or burns and bolsters are still firm on seats with no wear.

Will have photos up ASAP.

Any further questions call me 0400 841 142

Edited by CHO50N
Link to comment
https://www.sau.com.au/forums/topic/264802-eoi-1994-r32-gtr-v-spec-2/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...