Jump to content
SAU Community

Recommended Posts

Hey guys,

want to sell/swap my wheels.

These rims are 8.5inch wide on the front, and 9.5 inch wide on the rear.

Not sure on the offsets. They sit out very fat though with 25mm spacers on the front and 30mm spacers on rears

235 Nexen tyres with 90% tread on the front

265 Kumho ecsta tyres with 70% tread on the rear (bit of camber wear)

n536895326_6125360_2231211.jpg

n536895326_6125376_5299787.jpg

The rims cost me 2k with tyres only 6 months ago, and there is not one scratch on them.

Looking to sell for $1300 neg

If you buy it for 1300, I will throw in 2 sets of hubcentric spacers.. 25mm and 30mm.. This is worth $300 alone!

This is how it sits with 25mm spacers on the front.. I havent put 30mm spacers on teh rear yet as I would need to pump my guards but it will sit FAT

dsc0003syp.jpg

dsc0007dsk.jpg

DSC_0078.jpg

DSC_0079.jpg

fitment of fronts with 25mm spacer

DSC_0082.jpg

DSC_0084.jpg

DSC_0076.jpg

rears

DSC_0081.jpg

DSC_0085.jpg

You can clearly see in those pics the condition of the tyres..

235 Nexen on the front

265 Kumho on the rears

I've got 30mm spacers for the rear that I will chuck in with the sale. I have not put them in yet because need to pump my guards a little bit! [HAVE NOW PUMPED GUARDS AND PUT ON 30MM SPACERS, pics will be up soon]

I'm only selling them because I need cash for a respray. Have some nice drift damage on the rear :lol:

OPEN TO NEGOTIATION!! Throw me your offers guys!

Located in Sydney

Cheers

Rohan

Link to comment
https://www.sau.com.au/forums/topic/264820-18-black-rims-with-chrome-dish/
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi GTSBoy, Excuse my ignorance but what does a "Bad" Knee point mean ? 
    • HFM BM57 has a "bad" knee point, IIRC. It's not the same thing as the later R chassis MC.
    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
×
×
  • Create New...