Jump to content
SAU Community

Recommended Posts

Cleanout of parts that i have accumulated over the years, will accept PayPal , direct dep. Or COD, will post at buyers expense, i have weights & dimensions for most things, people are welcome to get their own quote, i will package, but don’t expect anything flash.

ALL OFFERS CONSIDERED!!

Ring/PM Rob

0403301857

(Melbourne)

R32/R33 BATMBL style stainless steel split dump pipe turbo back good O2 sensor & cat convertor

3 wire O2 sensor included in working condition

$200ono

post-27754-1239606275_thumb.jpgpost-27754-1239606345_thumb.jpgpost-27754-1239606364_thumb.jpg

JJR Style R32/R33 split dump pipe turbo back, stainless steel, woven wrap fibreglass heat shield only a few months old, stainless steel ties, high temp paint on woven wrap to prevent corrosion. (over $150 worth of fibreglass wrapping from the states)Decreased under bonnet temps .

3 wire O2 sensor included in working condition, tested with multimeter voltage very quick to react

$200ono

post-27754-1239606382_thumb.jpgpost-27754-1239606403_thumb.jpgpost-27754-1239606423_thumb.jpg

tubular bolt in 6 point roll cage with padding, plates, bolts. Came out of a D2 car from Japan, built for R32, not too sure what other cars it would fit into, possibly laurel/cefiro

$1000ono

post-27754-1239606443_thumb.jpgpost-27754-1239606467_thumb.jpg

JIC shortened R32 front upper arms

$150ono

post-27754-1239606490_thumb.jpgpost-27754-1239606512_thumb.jpg

R32 4 door type M side skirts, rare

$250pair ono

post-27754-1239606531_thumb.jpgpost-27754-1239606549_thumb.jpg

Nissan Skyline R32 GTS/GTR,300ZX And S13 Rear Suspension Upper Control Arms

S13 1989-1994

300Zx Z32 1989-1994

Skyline R32 1989-1994

$80pair

post-27754-1239606574_thumb.jpg

Genuine Cusco pillow ball castor rods/arms suit R32 gts/t S13

$250ono

post-27754-1239606596_thumb.jpg

Whiteline R32 front & rear strut braces, practically new

$320

post-27754-1239606632_thumb.jpg

R32 impul front sway bar with D-shackles & bushes

$100ono

post-27754-1239606652_thumb.jpg

R32 gtst manual standard computer, 93’ model, un chipped

$150ono

post-27754-1239606677_thumb.jpg

R32 type m front bar (plastic) holes cut for N1 nostrils (i don’t have these) and windscreen washer squirter for FMIC spray, bar would come up looking great once painted

$120 ono

post-27754-1239606735_thumb.jpgpost-27754-1239606761_thumb.jpg

R32 type m front bar damaged on LHS,

$80 ono (pick up only)

post-27754-1239606793_thumb.jpgpost-27754-1239606829_thumb.jpg

Exedy Clutch Kit

This is a Heavy Duty Clutch Kit for the following:

Nissan Skyline RB20DET & RB25DET

R31- 1987-89 2.0Lt

R32- 1989 onwards 2.0Lt

R33- 1993 onwards 2.5 Lt

Purchased from CBA WA for $450

Clutch is practically new save $$

Clutch was used for approx. 2-3months on RB20DET powered Nissan skyline R32 with 210-220rwkw without slipping once. Very street-able clutch with good pedal feel (heavier than standard) and friction , clutch had a very easy life for the short period it was in my car (i don’t track or drift my car), data sheet that i have from when i bought the car says it has following specs:

clamping load = 2400 LB

faces = 2

Radius =7.625

Friction coefficient = 0.3

Torque = 457.6 ft/lb @ 4500 rpm

Horsepower = 392 HP

$250

post-27754-1239606860_thumb.jpgpost-27754-1239606876_thumb.jpgpost-27754-1239606898_thumb.jpgpost-27754-1239606918_thumb.jpgpost-27754-1239606941_thumb.jpg

RB20 clutch fans 2 to choose from

$40 each

post-27754-1239606958_thumb.jpgpost-27754-1239606975_thumb.jpg

Trust S15 exhaust and cat convertor. 2 parts held together with TRUST stainless clamp.

Has 'Jasma' plate on it (whatever that means)

Stainless rear cannon muffler (few scratches as seen in pictures but no dents)

Rest of exhaust and second muffler made from mild steel, painted in high temp matt paint.

Cat convertor is near new but is welded in place,

$700ono

post-27754-1239606992_thumb.jpg

R32 standard front sway bar

$20 (pickup only)

post-27754-1239607008_thumb.jpg

Aluminium intercooler piping, lipped either end, 3” mandrel bent

$20 pair

post-27754-1239607026_thumb.jpg

R32 RB20 cam gears, standard parts, prefect condition, no wear on teeth, come as pair but may split

$50ono

post-27754-1239607047_thumb.jpg

R32 s13 front left lower control arm

$30

post-27754-1239607061_thumb.jpg

Nolathane ‘D’ shape bushes

Repco part no.

42150 (x2) 24mm ID/ 31mm OD

42937 (x2) 27mm ID /31mm OD

D shackles, for sway bar, tried to fit but never used, comes with grease sachet

$20

post-27754-1239607078_thumb.jpg

Standard R32 fuel pump, taken out of low Km car

$30

post-27754-1239607117_thumb.jpg

R32 ashtray with Apexi badge, rice up your interior with this fine specimen

Brand new heat shield for oil/water & turbo return lines, sized to fit single turbo RB motor but has many applications. 2 x 1000mm

$40

post-27754-1239607140_thumb.jpgpost-27754-1239607156_thumb.jpg

post-27754-1239607097_thumb.jpg

  • Replies 53
  • Created
  • Last Reply

Top Posters In This Topic

R32/R33 BATMBL style stainless steel split dump pipe turbo back good O2 sensor & cat convertor

3 wire O2 sensor included in working condition

$200ono

Willing to separate the cat? is it 2.5" or 3"?

Thanks

what size sway bar will those notalane shackles and dbushes fit? front or rear?

bushes are for either 24mm or 27mm dia. sway bar, i can only guarantee the hole centres for the 'D' shackles will line up for the front sway bar on a R32, being a nissan though, most likely it will fit on the rear sway bar also but i cannot guarantee it.

what size is the impul swaybar?

To reply to everyone's queries, the impul sway bar is only 24-25mm dia. so i don't think it would greatly bigger than standard.

Also i am almost positive that i won't fit a GTR,

call dibs on front n rear upper control arms

pending response

text message sent

All PM's replied to i think so if you are waiting for reply and i haven't then let me know, i am losing track of who sent what, too many items psoted at a time..

is the drivers side torsion bar on the roll cage bent????

pm me a est. price on postage if you have one please.

Nah the cage isn't bent, the bars are made like that on both sides so that they are below the level of the seats (so your hip doesn't rub against them) across the drivers & passengers doors & don't obstruct you getting in and out of the car, I may have pictures fitted somewhere if you are interested, PM me your postcode so i can quote you for freight.

Thanks

R32/R33 BATMBL style stainless steel split dump pipe turbo back good O2 sensor & cat convertor

3 wire O2 sensor included in working condition

SOLD!!!

All PM's replied i think

JJR Style R32/R33 split dump pipe turbo back, stainless steel, woven wrap fibreglass heat shield only a few months old, stainless steel ties, high temp paint on woven wrap to prevent corrosion. (over $150 worth of fibreglass wrapping from the states)Decreased under bonnet temps .

3 wire O2 sensor included in working condition, tested with multimeter voltage very quick to react

Brand new heat shield for oil/water & turbo return lines, sized to fit single turbo RB motor but has many applications. 2 x 1000mm

both sold

For those that have asked:

JIC shortened R32 front upper arms are 155mm between centres compared to 180mm stock, not sure how many degrees camber change it gives.

tubular bolt in 6 point roll cage with padding, plates, bolts. Came out of a D2 car from Japan, built for R32, not too sure what other cars it would fit into, possibly laurel/cefiro

SOLD PENDING PAYMENT

Nissan Skyline R32 GTS/GTR,300ZX And S13 Rear Suspension Upper Control Arms

S13 1989-1994

300Zx Z32 1989-1994

Skyline R32 1989-1994

SOLD

JIC shortened R32 front upper arms

SOLD

just to correct a few mistakes (how the hell do u make a donation so u can edit yours posts??)

The roll cage is for a 4-Door R32 and wont fit a 2-door

And the front lower control arm is a RHS one not left . WHOOPS!!! My mistake sorry Russ!!

Both of these are still for sale..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...