Jump to content
SAU Community

Recommended Posts

Hi guys, need some advice. Actually..this question is for a mate of mine. He got pulled over by two cops a few nights ago in his car. The cops asked him "Do you know how fast u were doing?" *classic question*

:)

He wasn't sure and didn't know what to say. So they gave him a ticket and said something like Oh you were doing 80. And he was quite baffled. Throughout this whole time, they didn't show any proof of a radar gun trap speed, nor was there a radar gun in sight. Now...what they next said was something to the effect that 'we're going to be nice and write it as going at 70' and promptly issued him a fine. I think the road speed was 60 if I'm not mistaken. But I'm guessing they must've tailed him for some distance before pulling him over. And if there was no radar gun shown, that means there's no proof! What's irritating is that they gave this "we're so nice we'll just fine you for a lower speed" thing. Of course..being gracious for their 'mercy' is one thing..but there's still no trap speed, hence no proof. Is there a possibility of disputing this in court? Or via a letter to the civic centre? Advice?

Thanks!

Link to comment
https://www.sau.com.au/forums/topic/26664-another-stupid-police-question/
Share on other sites

probably a good idea not saying anything at the time, as that is used as evidence against you later.

I'd say it could be disputed in court with a reasonable lawyer. Anyhow, 10km/hr or over (e..g right on 70) is still 3points and $200 or something, so doesn't matter whether they wrote down he was "only" 10km/hr over. Unless he only had 1 point left or something, than no point fighting it.

legal fees?

fight it yourself.

i just went through it all and got a 6 month suspension down to one month.

It's worth fighting. doesnt cost you anything

the police man followed me and estimated my speed.

And in the courts eyes thats open to debate.

It was alleged i was doing 100 in a 60 zone.

I said nothing on the night at all... and when it got to court i said i was doing 92 in the 60 zone.

I had spoken to the Police prosecutor in weeks prior and discussed it with him and he said that seeing as though the informant (the officer in question that has charged you) had no speed camera and was only going on what he 'thought' i was doing by looking at his speedo, which has an element of error.

So he sayus 100 - i say 92, the coppers have no proof that i was doing 100, and hence no proof to say i wasnt doing what i said of 92.

So the fine/charge was all lessened a great extent.

Also seeing as though your only down for 70 in a 60, if you were in traffic you could quite easily argue the point.

Especially if you have a witness.

1) You can say that speedo was on 60 and a car next to you went past and maybe the officer was confused.

2) you can say that there was no way it was 70, but it was more like 64 or something. that allows for a margin of error on the coppers behalf, but at the same time they still get you.

i'd go option 2 (only if the fine/demerits are less)

hope that helps ya's decide.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Input shaft bearing. They all do it. There is always rollover noise in Nissan boxes - particularly the big box. Don't worry about it unless it gets really growly.
    • For once a good news  It needed to be adjusted by that one nut and it is ok  At least something was easy But thank you very much for help. But a small issue is now(gearbox) that when the car is stationary you can hear "clinking" from gearbox so some of the bearing is 100% not that happy... It goes away once you push clutch so it is 100% gearbox. Just if you know...what that bearing could be? It sounding like "spun bearing" but it is louder.
    • Yeah, that's fine**. But the numbers you came up with are just wrong. Try it for yourself. Put in any voltage from the possible range and see what result you get. You get nonsense. ** When I say "fine", I mean, it's still shit. The very simple linear formula (slope & intercept) is shit for a sensor with a non-linear response. This is the curve, from your data above. Look at the CURVE! It's only really linear between about 30 and 90 °C. And if you used only that range to define a curve, it would be great. But you would go more and more wrong as you went to higher temps. And that is why the slope & intercept found when you use 50 and 150 as the end points is so bad halfway between those points. The real curve is a long way below the linear curve which just zips straight between the end points, like this one. You could probably use the same slope and a lower intercept, to move that straight line down, and spread the error out. But you would 5-10°C off in a lot of places. You'd need to say what temperature range you really wanted to be most right - say, 100 to 130, and plop the line closest to teh real curve in that region, which would make it quite wrong down at the lower temperatures. Let me just say that HPTuners are not being realistic in only allowing for a simple linear curve. 
    • I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
×
×
  • Create New...