Jump to content
SAU Community

Recommended Posts

Item:

WORK VS KF & CR KAI

2x WORK VS-KF Super Chrome 3D

18x8.5jj +28 5x114.3 pcd (5 stud)

WORK Finest 3 piece Modular Construction

luxury sports 5 spoke wheels with reverse outer rim.

Available in various fitments for luxury sports cars and other high performance cars with custom application.

Colors: Silver, Black Burning and Chrome centers. (Chrome is most expensive)

2x WORK Emotion CR-KAI Work Metal Buff

18x9.5jj +30 5x114.3 pcd (5 stud)

Emotion CR-Kai, one of our most celebrated wheel in the Emotion line up. Emotion CR-Kai is a one piece low pressure cast aluminum wheel.

The unique and aggressive split 5 spokes design that has been highly regarded, even accepted and copied by many of our competitors.

Emotion CR-Kai has been proven both on the track and street. Wide range of sizes and offset available. Application is available for most front wheel, rear wheel and all wheel drive vehicles.

Location:

sydney australia

Website:

http://www.workwheelsusa.com/product.php?c...26&wheel=72

http://www.workwheelsusa.com/product.php?c...27&wheel=80

Item Condition:

as new, excellent condition - VS-KF includes centre caps

CR KAI - minor rash on both wheels but as new condition, (work dont make centre cap for CR KAI)

Reason for Selling:

no longer needed

Price and Payment Conditions:

check link below for retail price of cheapest supplier in australia, pair of these wheels cost well over $1500 retail!

http://www.nissansilvia.com/forums/lofiver...hp/t364860.html

selling them both VS-KF for $950.. shipped

selling them both CR KAI for $1050.. shipped

absolute steals

if you buy both sets, i will throw in a pair of Potenza RE-01R tyres 225/40/R18 with good tread.. cost over $400 per tyre

RE-01R is regarded the best all round street tyre available to consumers.. please do not comment if u have not used them

Extra Info:

i can arrange cheap reliable courier service to anywhere in australia at your expense..

pickup ok too, pm me

Pictures:

wheelImage.png

0.93851300%201180352447_129.jpg

pictures of actual wheels below

posta216339wheels2.jpg

IMGP0581.jpg

Contact Details:

please pm me

keep in mind

if you want a whole set, you can buy them from a sponsor or a distributor along with a pair of my wheels lsited here

and still save hundreds of dollars with the price im selling them at

each of those babies cost well over $1500 a pair + shipping.. check the link above

Your prices quoted above as shipped, yet under extra info you quote courier delivery at buyers expense? So which is it? $950 for the kfs delivered to Brisbane?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Im not entirely sure exactly what or where its leaking from, he started to pull the boots to swap to my new tie rods + ends and it just vomited fluid, so he closed em up up, swapped the rod ends to the old rods and let me know so I can figure a solution out, im guessing its all origional as as I passed 103k miles earlier this year im sure its just in need of a full overhual/rebuild anyways.    If i could just yank it off and be good it wouldn't be an issue to ship it out and wait for the turnaround but the guy I work with doesnt really have space to keep my car for a week or two at a time, would rather drop it off and have a replacement ready to drop in
    • What do you mean by "seals"? Internal hydraulic seals (ie, is it leaking PS fluid?) or the rack boots that close the rack onto the tie-rods? Because the former is a rebuild, and the latter is trivial that you or any nearby mechanic could do. Dunno about the cowl. Just buy what you think is required and get anything else you find/break afterwards. Wing? Dunno. Don't like R33s enough to pay attention to them. Mirror glass is just glass (on the surface that you want to polish). Go for it.
    • Hello! Long time lurker, been using the forums to address concerns and questions from afar for a while but I've struggled to find some answers so I guess its about time I made an account and formally asked some more knowledgeable people, since finding local skyline owners is hard (and shops that are knowledgeable or trustworthy to work on 'rare' cars are non existent out where im at, as skylines are quite uncommon to find in the wild around here). So the main 3 questions I have, 1: Steering rack has blown seals, well.. they kind of hold but they are not sealed properly anymore and as my R33 is my DD, i cant exactly rip the rack out and send it off or attempt to fix myself. As most refurb ones are around $1,100 or more shipped, and I have other things I need to work on around the car, I was seeking clarification on whether an S15 rack will more or less bolt right in, and whether a common mechanic could do any other required work to get it to fit. I ask, as I've found a supplier than can sell a manufactured as oem one for around 400, if not I'll likely order a used one from Jacks JDM, and take a risk on the seals there. The second question i have is that im replacing the front wiper cowl and have planned to buy 4 new clips and a new center clip but wasnt sure if there were any other clips that would also need to get replaced while I was at it. Given im sure any that are there now will simply break when I remove the old cowl... Last thing would be a fairly straight forward question, i think. If I manage (strong if, finding one has proven to be a pain) to find a R33 GTR spoiler/wing will it require much modification to bolt to a S2 R33 GTST? I've read the bolt patterns dont match but otherwise would bolt in, only options I have found with much luck is China stuff on ebay and carbonetics, which has a nice $650 shipping fee... so if anyone has any pointers where a US chap could locate one that would be great Random side question as well, the mirrors as I understand are mirror glass, and as im planning to polish my windows from water spots and surface scratches, i was hopeful cerium oxide would be fine for them too, as my research points to, but clarification is always nice. Any pointers would be appreciated, and while I have scoured the internet for answers if I missed a prior post somewhere that may answer these directly please point me towards it, as i must have simply missed it. I have seen a post here or there that has mentioned it, but I usually get 50-50 answers, or half answers... I dont have a lot of fab experience or mechanic experience, outside of hydraulic and pneumatic stuff I did in the military and with how hard it is to source stuff in the US, id rather not wing it and hemmoraghe money lol. Thanks guys! Sorry for the monumental first post haha
    • Yep, there's a very minor drift left that happens a few seconds after letting go of the steering wheel, but not enough to bother me. Enjoying the car still!
    • Got you mate. Check your email!
×
×
  • Create New...