Jump to content
SAU Community

Recommended Posts

Hello, just a few questions, i have a stockish r33 gts-t..

i've recently got my catback exhaust put it... anyway my mates saying i should get "front and dump pipes" anyone know whats the difference between this and 'extractors'? thanks..

also, whats the difference between tuning and remapping?

also, my mates saying i have adjustable coilovers. what are they? and what do th ey do?

also, when im steering ALL The way to the right It makes a noise like my cars scraping onto something.. (normally int he cold.. doesnt hapepn allt he time)

Also, if a front mount intercooler makes the fluttering, isnt that what a blow off valve does? is it a good idae to get a fmic and a blow off valve together?

what do they do exactly?

When turning on my engine, i have to hold my key for about 2-3 seconds before the engine turns on, my friends saying i need new spark plugs? is this true? why? and how much will it cost?

Btw. what does 200rwkw Run quarter mile?

sorry people but im learning, hope you all can be of help.

thanks

thanks!

Edited by noobcake
Link to comment
https://www.sau.com.au/forums/topic/267388-alot-of-questions/
Share on other sites

Hello, just a few questions, i have a stockish r33 gts-t..

i've recently got my catback exhaust put it... anyway my mates saying i should get "front and dump pipes" anyone know whats the difference between this and 'extractors'? thanks..

Extractors (Exhaust Manifold) is what your turbo is bolted on to, Front and dump pipes is the pipes which connect to the exhaust manifold / turbo.

It is the front part of the exhaust system then your cat converter then your cat back exhaust.

also, whats the difference between tuning and remapping?

Tuning / Remapping, it can be part of the same process... Eg if you want to run more boost, ppl usually "remap" the ECU to improve Air / Fuel ratios and make sure they are correct when running higher boost, that's whats called tuning.

also, my mates saying i have adjustable coilovers. what are they? and what do th ey do?

It's your suspension setup.

This allows you to adjust the height of your car.

It give your the advantage to lower your car to improve it's handling.

also, when im steering ALL The way to the right It makes a noise like my cars scraping onto something.. (normally int he cold.. doesnt hapepn allt he time)

:P Could be just your tyres rubbing up against the inner wheel guard when you do a full lock right turn.

You got bigger wheels and tyres on the front?

Also, if a front mount intercooler makes the fluttering, isnt that what a blow off valve does? is it a good idae to get a fmic and a blow off valve together?

what do they do exactly?

A front mount intercooler (FMIC) does not make the "Fluttering" noise, only an aftermarket blow off valve (BOV) makes the flutter / dose noise.

FMIC will only gain your performance if you are running a high amount of boost to improve your cooling.

You already have a stock BOV and no need to change it.

Aftermarket BOV are useless, just makes noise and that's it.

When turning on my engine, i have to hold my key for about 2-3 seconds before the engine turns on, my friends saying i need new spark plugs? is this true? why? and how much will it cost?

:) ... Never heard of this before.

Only reason I would turn the key and wait 2-3 seconds before starting it up is to allow the fuel pump to get the fuel pumping...

Btw. what does 200rwkw Run quarter mile?

You might have to ask a few R33 GTS-T owners on here.

sorry people but im learning, hope you all can be of help.

thanks

thanks!

:D Cool!

you know not to hold your wheel at full lock right its bad for your power steering pump..

the delay in cranking could be an aftermarket fuel pump priming, is it noisey when cold?

as for the 1/4 mile ET there is so much room for difference (suspension, tyres, driver etc)

you would have to go to the drags and find out, saying that I would assume low 13's

get a front and split dump pipe and tune it then find out :P

i've recently got my catback exhaust put it... anyway my mates saying i should get "front and dump pipes" anyone know whats the difference between this and 'extractors'? thanks..

Extractors (Exhaust Manifold) is what your turbo is bolted on to, Front and dump pipes is the pipes which connect to the exhaust manifold / turbo.

It is the front part of the exhaust system then your cat converter then your cat back exhaust.

also, whats the difference between tuning and remapping?

Tuning / Remapping, it can be part of the same process... Eg if you want to run more boost, ppl usually "remap" the ECU to improve Air / Fuel ratios and make sure they are correct when running higher boost, that's whats called tuning.

also, my mates saying i have adjustable coilovers. what are they? and what do th ey do?

It's your suspension setup.

This allows you to adjust the height of your car.

It give your the advantage to lower your car to improve it's handling.

also, when im steering ALL The way to the right It makes a noise like my cars scraping onto something.. (normally int he cold.. doesnt hapepn allt he time)

:D Could be just your tyres rubbing up against the inner wheel guard when you do a full lock right turn.

You got bigger wheels and tyres on the front?

Also, if a front mount intercooler makes the fluttering, isnt that what a blow off valve does? is it a good idae to get a fmic and a blow off valve together?

what do they do exactly?

A front mount intercooler (FMIC) does not make the "Fluttering" noise, only an aftermarket blow off valve (BOV) makes the flutter / dose noise.

FMIC will only gain your performance if you are running a high amount of boost to improve your cooling.

You already have a stock BOV and no need to change it.

Aftermarket BOV are useless, just makes noise and that's it.

When turning on my engine, i have to hold my key for about 2-3 seconds before the engine turns on, my friends saying i need new spark plugs? is this true? why? and how much will it cost?

;) ... Never heard of this before.

Only reason I would turn the key and wait 2-3 seconds before starting it up is to allow the fuel pump to get the fuel pumping...

Btw. what does 200rwkw Run quarter mile?

You might have to ask a few R33 GTS-T owners on here.

sorry people but im learning, hope you all can be of help.

thanks

thanks!

:bunny: Cool!

gotta love the way you answer questions!

tops! :P

do you guys reckon i need extractors for my full exhaust system? also

since i got adjustable coilovers, is it hard to higher/lower a car? and is it expensive?

No you will not need aftermarket extractors unless you have a modified (bigger) turbo.

I have not done it myself but I don't think its hard to adjust your suspension, just takes time and you will probably need a wheel alignment after lowering the car.

Just get your mechanic to do it and it should not cost too much, whatever labor cost your mechanic charges

gotta love the way you answer questions!

tops! :/

Haha!!

Thanks buddy! :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...