Jump to content
SAU Community

Recommended Posts

Ok guys and girls its time to play " whats that noise?! " :)

K, when my GTS hits 2500rpm i get a really horrible noise coming from the exhaust which lasts to about 3000rpm.

Its like a vibrating note and sounds like shit.

Just wondering if its my Catalytic Converter, Muffler, Natural resonance or me???

Link to comment
https://www.sau.com.au/forums/topic/26751-exhaust-note-noise/
Share on other sites

assuming you have a stock exhaust, One with the twin head on it???

Have a look down the righthand side and you should see a flap over the hole, blocking it..

Like this... ex2.jpg

I believe the cable you can see in the next photo opens the hole when the pressure builds up or the car reaches a certain rpm!! This could be the cause of your noise! I find mine gets louder around the same time!

There is a cable on the upper right hand side that opens this flap!ex1.jpg

Just a thought!!!!

I know what you mean, its like a flapping, cracking noise from about 2500-3000, i think its a N/A thing, i got a barrel muffler put on and it just mad it louder sounds kinda cool like you got some funky mods or something, after a while when the engine heats up after 10mins or so it seems to die down a little bit. I can never work out what the noise is, i heard the cams do it aswell.........

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...