Jump to content
SAU Community

Recommended Posts

hey guys ive been speaking with kyle for a bit and am about to see if we can get some discounts on a few of his amazing manifolds.

Heaps better then the HKS TRUST stuff because its mildsteel and nto stainless. stainless due to its nature is wears out 3 times faster then mildsteel, and is very prone to cracking. im even willing to stake the very lil and useless reputation i have on these forums and say that its honestly the best stuff money can buy!!!!

i havnt confirmed it yet but manifolds will properly be around the $900 or $1000inc delievery for a single turbo split pulse manifold for any rb head.

turn around time is around 2-3 days per manifold and we will need approx 5-7 people for the price quoted above.

if you guys have any questions please post and ill get back when i speak to kyle and confirm everything.

at this stage i am simply trying to gauge an interest. hope thats ok mods.

Cheers

posta1939316boost.th.jpg

Edited by Jap_Muscle
Link to comment
https://www.sau.com.au/forums/topic/267716-eoi-6boost-manifolds/
Share on other sites

alright guys looks like we might be teaming up with the peeps over at Calais Turbo which means we could get even more cheaper stuff.

ill get a price on ceramic coating in ext black OJE730 and get back to you soon.

let me know if you guys need anything else!

so far we have 4 ppl interested

1 = Jap Muscle

2 = two.five

3 = OJE730

4 = mattis96

Edited by Jap_Muscle

Im sort of interested in one of these.

would need an rb25 manifold to suit a gt3040 with 35mm ext gate.

can you get a definite price and how much it is for ceramic coating?

also would we be paying direct to kyle? as you have less than 50 posts and no trader rating... I would feel more comfortable....

Edited by midnight

do you actually want a 35mm gate or a externally gated manifold with a 35mm opening?

any manifold is fine, wether its t28 or t5, rb20 to rb26 and internally gated or externally dosnt matter. so long as its a single setup. you can get twin setups but expect more $$$

i will get a price on coating so hold tight. being a weekend i dont think kyle picks up his phone.

about the payment to kyle. i guess its possible but it just makes the group buy more difficult. ive dealt with kyle many times before and the way he operates is through msgs for orders, so having 10ppl msg him about a single group buy will be very confusing.

is there anything i can do to prove that im legit?

id really like to get some trader points so i dont always get this problem

Edited by Jap_Muscle

I already have the gate. its 35mm diameter,

so id need external gated manifold to suit a 35mm gate.

is there anyone reputable on this site who knows you that can vouch for you? I hope you understand my concerns...

Hey guys i finally got all the prices. you can see them here

http://www.skylinesaustralia.com/forums/Of...ld-t268420.html

ill be keeping this thread as the questions thread in regards to the groupbuy since i cant edit the original post.

some good news turbostyleR, i spoke to kyle and his happy to do SR manifolds aswell. infact you can order what ever you want =D

any questions please post here. and only post in the official thread if you want to place a order.

=D

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Put a fuel pressure gauge on it. Replace the turbos. Probably completely separate issues.
    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
×
×
  • Create New...