Jump to content
SAU Community

Recommended Posts

Well, the dream might be over before it started.. I need $$$ and am looking for interest on my Iron Mask coupe.

All mods were carried out in Japan, they include:

Bride fixed back seat

Side mount rail

Nardi 330mm wheel

Safety 21 1/2 cage

Pivot shift light

Speed/rev meter

Greddy boost controller

Greddy turbo timer

4x Omori/greddy gauges

Cusco strut brace

Cusco camber plates

Old FMIC kit

HKS POD

Grex Oil cooler + filter relocation

Kakimoto 3 inch exhaust with front pipe

Bilstein shocks

Lowered springs

15x6.5 SSR Formula mesh

IMG_0647.jpg

Picture089-1.jpg

Picture035.jpg

Picture027.jpg

Picture029.jpg

Picture097.jpg

Damage: Drivers door caught on something while reversing - 2 spare doors are included. Aus spec guards can be had for around $60

It is uncomplianced but falls under the pre 89 rule, so in theory it can be registered.

Like most DR's it has some rust.

The ECU was changed from a standard unit to a Mines one before it was picked up by the car carrier and now it won't start :banana:

Recent compression test came out fine.

It has the late DR30 bodykit complete in vgc.

$3000 as it sits, or closer to $4000 for it running good

Not looking at parting out yet.. Sorry!!

[email protected]

Edited by D-limo
Link to comment
https://www.sau.com.au/forums/topic/267938-my-dr30-iron-mask-coupe/
Share on other sites

  • Replies 64
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Quite surprised in the interest generated. Price is revised to $3400 as is.. At that price I am just breaking even.

For $3400 I think its still alot of car for the money.

Car Now has a 350mm Nardi not pictured.

Is an Ex VIC car, Its featured on FJ20.com as well.

Ghostrider you have email.

Edited by D-limo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...