Jump to content
SAU Community

Recommended Posts

1987 hr coupe turbo

new paint job pearl white 2tone silver

Engine mods

fitted with an r33 rb25 det engine which has only done 85,000ks chassis has done 156,000ks

apexi axb370 turbo kit which made me 220rwk on 17psi

very rare gts-R ex manifold

a gredy style inlet plenum witha 90mm throttle body

3''dumpy 3'' exhaust all through

gtr bovs custom pipes to a huge custom cooler

microtech lt10 ecu

oil cath can

new heavy duty clutch

battery in boot,recoed radiator

after market hks cam gear

plus more

Interia

genuine svd gts2 front and back seats

gts1 momo steering wheel

genuine hr gear nob

boost gauge sensibly posistiond

blitz boost controller currantly on 10psi

genuine rare nissan floor mats

jvc head unit with jl vr front speakers and tweeters

rear jl tr speakers fitted,needs a tune

front bar is a genuine svd gts2 plastic not some mockup fibre glass one

converted to five stud pattern with r32 gtr calipers and rotors at the front

r32 gtr rims and new tyres

suspension

garage7 coilovers at the front

pedders shocks and springs at the rear

theres much more things just cant think of it at the moment

rare spare parts also included,

reason for selling is im upgrading to a 4wd due to work purposes, The car comes with custom plates GTSX31 and reg till dec,has always been serviced every 5000 ks with only the best oils

i have lots of photos just let me know if youd like some .ASKING 14500 ONO

if you have any questions or want to come for inspection plz call me on 0402353698 cheers,melb vicmodify_inline.gif

post-43358-1241316228_thumb.jpg

post-43358-1241316271_thumb.jpg

post-43358-1241316328_thumb.jpg

post-43358-1241316392_thumb.jpg

post-43358-1241316433_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/268179-r31-gts-x-coupe-vic/
Share on other sites

Cool car, any interior pictures? Also, is it an RB20 box or RB25? Is it registered/engineered with te RB25 in it? Is the Microtech plug and play or has it been wired in?

the gearbox has been rebuilt and its an rb20 from a 93model r32 gtst,holding great,the microtech i think its a plug in1,interia piks coming soon its registerd has reg till end of dec,didnt need a egineer cert as it wasnt a major engine displacent,just needed to put larger brakes to pass road worthy which i did.

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hello, sorry for being late to join the discussion, but my clock just died on me.   Ive tried to look at Michaels digital clock repair.docx and it doesnt work maybe the file has expired.   Please let me know if you can re upload it or take some youtube videos to show us how to get the clock installed? thanks
    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
×
×
  • Create New...