Jump to content
SAU Community

Hose's Hose's Hose's

boostn32
 Share

Recommended Posts

boostn32 Mentor

boostn32

Posted
Posted (edited)

I have various hose's forsale need the room so all must go.

1. PLUTONE 'A' SUCTION HOSE 16MM APPROXIMATELY 9M LONG $35

Helisteel is a clear wire reinforced suction hose that is ideally suited for applications that require

continual bending or flexing. It is a heavy duty non toxic hose that is clear, allowing you to view the contents of the hose during operation. Helisteel will transfer a range of foodstuffs including

wine and fruit juices. Also suitable for the conveyance of fresh or salt water, slurries, pulverized solids and a wide range of chemicals.

2. MULTI-PURPOSE/FOOD CONTACT HOSE 10MM 8.1M LONG 1.6MPa W.P $30

3. MULTI-PURPOSE/FOOD CONTACT HOSE 12.5MM 13.3M LONG 1.6MPa W.P. $45

4. MULTI-PURPOSE/FOOD CONTACT HOSE 32MM 6.7M LONG 1.0MPa W.P $45

5. MULTI-PURPOSE BLUE SILICONE HOSE 38MM 1.35M LONG $50

6. MULTI-PURPOSE BLUE SILICONE HOSE 63MM 1.12M LONG $40

7. MULTI-PURPOSE RUBBER HOSE 300PSI 25MM APPROXIMATE HOSE LENGTHS $30

67CM, 78CM, 1M, 97CM, 66CM ALL 25MM ID 300PSI GOODYEAR/MULTIFLEX SERIES II

8. MULTI-PURPOSE RUBBER HOSE 250PSI 1 1/4in 31.8MM 1.74M 250PSI GOODYEAR RUBBER $35

9. TIPAN SUCTION HOSE 38MM PETROL/OIL 1.4M $35

10. TIPAN/COPPER HEAD SUCTION & DELIVERY HOSE 63MM PETROL $45

SUCTION HOSE LENGTH IS APPROXIMATELY 1.13M, 57CM 63MM ID

DELIVERY HOSE LENGTH IS APPROXIMATELY 70CM 63MM ID

11. SUCTION HOSE 63MM PETROL/OIL VARIOUS LENGTHS 2 X 90CM 80CM 63CM 60CM $45

ALL ARE 63MM ID MADE IN USA

WILL SEND BUT PREFER PICK UP FROM UPPER COOMERA,

post-12049-1241342583_thumb.jpg

post-12049-1241342918_thumb.jpg

post-12049-1241343301_thumb.jpg

post-12049-1241343577_thumb.jpg

post-12049-1241343950_thumb.jpg

post-12049-1241344308_thumb.jpg

post-12049-1241344560_thumb.jpg

Edited by boostn32
Link to comment
https://www.sau.com.au/forums/topic/268237-hoses-hoses-hoses/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      RB26DETT Sketchy boost mod?

      By GTSBoy · Posted

      There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • GTSBoy
      Cas issue

      By GTSBoy · Posted

      The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Duncan
      RB26DETT Sketchy boost mod?

      By Duncan · Posted

      Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • nash47
      Cas issue

      By nash47 · Posted

      Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...