Jump to content
SAU Community

Recommended Posts

The following parts are located in Sydney but I can arrange postage.

R32 GTR Twin Turbos with dump pipes, manifolds & heat sheilds. Very good condition never boosted no shaft play no leaks. $550

R32 GTR Plenum. $100

444cc Injectors. $300

GTR Fuel Rail (injector feed). $50

R32 GTR 6 Pistons and Con-Rods. one Piston is no good the rest are fine, conrods are all good. $100

Used EXEDY (push type) single plate clutch heavy duty good condition to fit R32 GTR. $250

GTR AFM Air Flow Meter in good working condition (Tested). $150

Standard RB26 Cam gears. $50/pair

R32 GTR Complete Rear Tail Lights with covers excellent condition. $200/pair

R32 GTR Machined Flywheel. $100

R32 GTR HICAS computer. $50

R32 GTR 4WD Computer. $50

R32 GTR Intercooler works perfect. $200

Injector wireing with cover. $100

Coilpacks with loom $150

Twin HKS BOVs complete with Top mount pipe and hoses $350

NISMO cluster 320Km has 55000kms on it. $400

post-57341-1242564467_thumb.jpg

post-57341-1242564488_thumb.jpg

post-57341-1242564527_thumb.jpg

post-57341-1242564567_thumb.jpg

post-57341-1242564596_thumb.jpg

post-57341-1242564669_thumb.jpg

post-57341-1242566217_thumb.jpg

post-57341-1242566238_thumb.jpg

post-57341-1242566343.jpg

Link to comment
https://www.sau.com.au/forums/topic/270480-r32-gtr-parts-for-sale/
Share on other sites

Hey Guys The following is still for sale

R32 GTR Twin Turbos with dump pipes, manifolds & heat sheilds. Very good condition never boosted no shaft play no leaks. $550

GTR Fuel Rail (injector feed). $50

R32 GTR 6 Pistons and Con-Rods. one Piston is no good the rest are fine, conrods are all good. $100

Used EXEDY (push type) single plate clutch heavy duty good condition to fit R32 GTR. $250

Standard RB26 Cam gears. $50/pair

R32 GTR Complete Rear Tail Lights with covers excellent condition. $200/pair

R32 GTR Machined Flywheel. $100

R32 GTR HICAS computer. $50

R32 GTR 4WD Computer. $50

Coilpacks with loom $150

Twin HKS BOVs complete with Top mount pipe and hoses $350

Hey Guys The following is still for sale

R32 GTR Twin Turbos with dump pipes, manifolds & heat sheilds. Very good condition never boosted no shaft play no leaks. $550

GTR Fuel Rail (injector feed). $50

R32 GTR 6 Pistons and Con-Rods. one Piston is no good the rest are fine, conrods are all good. $100

Used EXEDY (push type) single plate clutch heavy duty good condition to fit R32 GTR. $250

Standard RB26 Cam gears. $50/pair

R32 GTR Complete Rear Tail Lights with covers excellent condition. $200/pair

R32 GTR Machined Flywheel. $100

R32 GTR HICAS computer. $50

R32 GTR 4WD Computer. $50

Coilpacks with loom $150

Twin HKS BOVs complete with Top mount pipe and hoses $350

Hey Guys The following parts are still for sale

R32 GTR Twin Turbos with dump pipes, manifolds & heat sheilds. Very good condition never boosted no shaft play no leaks. $500

GTR Fuel Rail. $50

R32 GTR 6 Con-Rods excellent condition. $100

EXEDY (push type) single plate Brass button clutch good condition to fit R32 GTR only 10,000 Kms traveled. $250

Standard RB26 Cam gears. $50/pair

R32 GTR Complete Rear Tail Lights with covers excellent condition. $200/pair

R32 GTR Machined Flywheel. $100

Coilpacks with loom $150

Located in Sydney (can post)

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...