Jump to content
SAU Community

Recommended Posts

I am fairly familiar with most aspects of cars except this area. If i ever considered gettin a colour change to some whacked out mix i wanna be informed about whats goin on. Does anyone know of any good resources (preferably accessible on the net) that i can get information about mixes, kinds of paint and steps needed for a re-spray etc.

I mainly interested in learning about all the different types, like pearls and those weird colour changing paints (i.e. chameleon).

Has anyone got some pics aswell of examples of kinds of effects (preferably on a skyline) etc.

Cheers,

Tom

Link to comment
https://www.sau.com.au/forums/topic/27051-car-re-sprayspaintprocess-etc/
Share on other sites

Basic process is they would take parts off like rear bar front bar wing etc. They would sand it back using a wet sander to either the bottom layer or to bare metal (bare metal costs more), If you want a professional job they would take the engine out and paint inside the engine bay.

The pearls are like mixing colours say white pearl there would obviously be white but also a tint of silver.

If you are really interested go talk to a painter im sure they would tell you the entire process and what they can do.

Yeah i was trying to find out as much as i could before actually going to a painter but yeah thanx for the info.

Does 5k include everything (paint labour etc.)??

Can you choose your own pearls and colours or will only some colours mix?

(sorry i really know sh!t all about paint and stuff)

Anyway if anyones got more pictures of anymore styles it would be appreciated if you post

Cheers

yeh i would think 5k includes labour etc

You can choose your own colours etc but that does depend on who you get it done through and what they offer cause really your paying for it so you could get what colours u want but you could ask the painter what it might look like. The guy i work with everynow and then played around with some paints one arvo one that caught my eye was yellow going into green on the bonnet looked really quite good. If you did get chamelion the price rises with the more colours u use and if you scratch it or something your up shits creek on trying to get it to match cause it would be very hard.

Some techniques like fading etc can look nice if you choose colours that look good together

Ok Sweet as, can you use basically any combination of colours with chameleon? im thinkin of a yellow/orange kind of chameleon effect but with a black undertone or something...i cant really explain it but i want mainly a bright/pearly black with some flares of orange/yellow(maybe red) etc.

this may be impossible or sound weird but yeah im not sure how it works so whatever.

I paid $5000 for the respray on my Gemini. The prices vary a lot. Remember you get what you pay for. The cheap ($1500) resprays usually don't go back to bare metal or use 2 pak paint. That Chamelion paint is way way expensive. The price has probably come down but 4 years ago when i painted my car the chamelion paint was almost $1000 a litre. Thants just the paint. From memory my gem used about 4 or 5 liters.

best thing is to go into a panel shop and they all have a huge wall of colour chips that you can flick thru.

its wicked fun choosing a colour for your car, but just try deciding on one! i pulled my hair out over what to paint it! so many colours look good. there is no BEST colour, but thats what you want!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
    • I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
    • I don't care for these at all, but at least the underside looks straight and not rusty. A good basis for a long life. Many cars from Japan have been lifted with forklifts and f**ked almost irrepairably.
    • Yes, but it's not dumb or dodgy. You can build a perfectly good boost controller from a pressure reg, a relief valve (looks same same as a reg if all from Norgren or SMC, for example) and a check valve. I ran one for years. Only superceded with  EBC because I could get one for cheaps and wanted finer control.   THis mod is certainly not a sketchy boost mod, provided the boost is kept below the "spin to death" threshold of the turbos.
×
×
  • Create New...