PFC Boost Controller Installation

[dominik]

The kit that I received is made up of two parts:

1) A boost pressure sensor... This devices wiring connects directly into the side of the PFC... This part I get

2) The boost controller itself with two hose fittings on it.

Now does the wiring off the boost controller connect to the wiring where the standard boost solenoid use to plug into?

It’s just that the plug on the boost controller and the plug for the standard boost solenoid don’t plug into each other!

So I am wondering witch wire off the boost controller (pink and black) matches up with the plug for the standard

boost solenoid (blue+white wire and green wire)

I have included pictures below

Any help is appreciated!

Any other suggestions/ways of connecting it also would help!

Thanx in advance Dominik

[dominik]

the plug for the standard boost solenoid

[dominik]

boost sensor and plug which plugs into the PFC

[dominik]

boost controller and plug..where do the wires connect to?

[Emre]

Now does the wiring off the boost controller connect to the wiring where the standard boost solenoid use to plug into?

Yes, the white plug in the third picture you've posted fits the GTR loom where the factory boost selenoid plugs into.

Brown from Apexi to your blue and red to green.

[dominik]

Fantastic Emre!!

Thanks for that!