Jump to content
SAU Community

Recommended Posts

hi guys. i have my R34 GTT NEO Plazmaman plenum inc a 72mm Throttle body up for sale as ive upgraded to a rb26.

some info from the plazmaman website.

Easy bolt on item , it eliminates all those ugly water lines and wiring that sit on top of the motor near the fire wall , and gives the engine bay a clean look. The OEM throttle bodies are big huge ugly items and therefore cannot be reused due to their physical size. Power increases of 20 + hp and torque increases across the whole rev range just by bolting it on

I made 330rwkw with this plenum and a gt35r seeing full boost by 4,000RPM which is amazing response.

Has only been on the car for about 2 months so almost brand new.

THROTTLE%20BODY%2010.jpgTHROTTLE%20BODY%208.jpg

TBODY%201.jpgTBODY%203.jpg

Normally priced at $1600 im looking for

$1300!!!

no one wants a quality plenum?

its possibly the best solution for us r34 ownerrs. because they use the existing long runners to maximize response, which is where greddy and other plenums fail.

come on guys!!!

I don't know if it's a direct fit but I compared it to a friend go runs a r33 plenum and the only difference were the bolts from wat I could see.

To be 100% sure you'd best call Plazmaman and ask

question as this has my interest as this is in my next line of mods. but the OEM setup has two butterflys for traction control. how does this work with that as id still like to keep my traction control option. also any pic of the under side?

ta

Ash

I honeatly would not know about traction control. I didn't bother with the hassle as I was pushing 380rwkw. No traction control was gonna work. I guess I can get in contact with Plazmaman and ask but you might be better off doing that yourself justincase you have more questions.

I'll get started on the kicks first thing Monday.

can you give me a price ?? got a mate comin over with his 34... going to check if they are the same

kind regards

Dean

the price is $1300, and will be neg if the buyer is serious.

shoot me a pm and we can talk buddy.

anyone else who is interested, please shoot me a PM as i have to many dreamers and low ballers wasting my time.

Thanks

Hrmm well dean do you have msn?

Sorry about the hassles, you wpnt beleve how many time Wasters there are. I shot u a pm with my details. I your serious get back to me

Edited by Jap_Muscle

I'm also keen on the throttle body. I have a plazmaman plenum allready, so the throttle should bolt straight on correct?

Edited by PM-R33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Initially I thought having a pair of Recaro seats would be a big bonus, it turns out these do get a little uncomfortable on long journeys (my fault, not the seat). I had a look through the GSM Performance website at reclining seats and booked an appointment to visit their show room. I got the Recaro Sportster CS for the R34 from here, was very happy with the service received so of course a re-visit was in order. Unfortunately the two Corbeau seats I had chosen aren't on display but they had 4 other options available. Two seats dug into my back, one dug into my legs and the other was perfect. I also found out that Recaro seats use a larger bolt pattern so some adaption was required. Luckily GSM offer some universal adaptors that should solve this problem. I searched the interwebs for price comparisons and Corbeau themselves were the cheapest at £300 cheaper (for the pair). I asked GSM if they could price match, unfortunately they couldn't. I later received an email saying Corbeau would honour them the same discount, but the purchase was already made. I did however order the brackets from GSM, both arrived on the same day. I started with the passenger side seat, knowing this was going to be a little trial and error. There are 3 mounting holes at the front and 2 at the rear on these JURAN Racing seat rails.  With the adaptor brackets mounted, the allen cap bolts started to push into the seat, NOT GOOD!  The rear mounting holes lined up but there were issues at the front. The holes were 1/2 hole out, so the brackets got a tickle with the drill to modify the holes. The supplied bolts weren't going to be long enough and a spacer was needed to stop the adaptor bars from bending. A local fasteners company supplied be with some nylon spacers and longer bolts (M8x30, although these will be replaced with 35mm long shortly) A before and after I pre-drilled the front bracket before making a start on the driver's seat to save some time. And in no time at all that was in the car too. The all black seats have transformed the interior and these are MUCH more comfortable. The only downside with the new Corbeau seats is I sit a little higher, but I'll happily accept that over discomfort. The Youtube video can be found here: https://www.youtube.com/watch?v=wPyttKPktXA
    • All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • 5th November if you want to come out for a spin wakfield
    • PROBLEM WAS BROKEN COOLANT SENSOR!!! Replaced with a new one and its running mint.
×
×
  • Create New...