Jump to content
SAU Community

Recommended Posts

Hey guys,

All parts are located in Westmead (Sydney's West) all parts are used unless specified. Pick up is prefered but I can arrange freight at your cost.

R33 GTST related:

R33 GTST Ntk o2 sensor, brand new $77 delivered..

Sydneykid Bilstein R33 GTST suspension set up ready to go F+R. Used for 5000-8,000kms paid $1600 Sell $1000ono

S1 front head lights, with eyelids and are in good condition. $400 pair

S1 bonnet, few dents and will need a spray. $100

Front Fenders L+R $250 pair (midnight purple)

Drivers front fender $125. (gun metal grey)

S2 Drivers Airbag $200. please note it is only the airbag not the steering wheel.

R33 S2 interior carpet $80 in top condition not tears etc.

R33 GTR related:

Greddy oil cooler with braided lines $700 came off a R33 S3 used for unknown kms.

EMS Stinger 4424 with loom attachement and PC cable. Came with my GTR but have replaced with a Haltech.. $800

http://www.enginemanagement.com.au/product...products_id=107

Other stuff:

V35 steering wheel in good condition, no airbag $200

Genuine Bosch 1 x 040 or 2 x 044 $220 each delivered

Haltech E11V2 brand new, $1450 with a generic harness or $1500 with a plug n play patch loom.

Rays short type lug nuts 16 and 4 lock nuts 1.25 m12 Nissan, Red $200

Pm me with your email address as the pics take way too long up upload here.

No low ball offers please & dont waste my time, If your cousin can get them cheaper go buy them off him.

Cheers,

Johno

Hey guys,

R33 GTST related:

...

S1 front head lights, with eyelids and are in good condition. $400 pair

Drivers front fender $125. (gun metal grey)

...

Cheers,

Johno

Can i get pics of the headlights and the gunmetal quarterpanel?

Could you please Pm me with your email addresses. Pics take way to long to load up here.

Cooler mounts behind the BOV's (passangers side) on a GTR. No thermo or relocator sorry.

Cheers,

Johno

headlights sold..

Bilstiens back up for sale, buyer fell through.. items will not be held, first with cash gets it.

Cheers,

Johno

Items SOLDHeadlights SOLD

Bilstiens SOLD

S2 Drivers Airbag SOLD

Prices dropped

S1 bonnet - $80

R33 GTST Ntk o2 sensor - $77 delivered

Front Fenders L+R $200 pair (midnight purple)

Drivers front fender $100 (gun metal grey)

R33 S2 interior carpet $80

Greddy oil cooler $600

EMS Stinger 4424 $700

Genuine Bosch 1 x 040 or 2 x 044 $210 each delivered

Rays short type lug nuts 16 and 4 lock nuts 1.25 m12 Nissan, Red $200

V35 steering wheel $100 no airbag.

Haltech Platinum 2000 with GTR patch loom, air temp sensor and 3 bar map $2270 (brand new)

More stuff to come.

Prices dropped

S1 bonnet - $80

R33 GTST Ntk o2 sensor - $70 delivered

Front Fenders L+R $200 pair (midnight purple)

Drivers front fender $100 (gun metal grey)

R33 S2 interior carpet $80

Greddy oil cooler $600

EMS Stinger 4424 $600

Genuine Bosch 1 x 040 or 1 x 044 $210 each delivered

Rays short type lug nuts 16 and 4 lock nuts 1.25 m12 Nissan, Red $200

V35 steering wheel $100 no airbag.

Haltech Platinum 2000 with GTR patch loom, air temp sensor and 3 bar map $2270 (brand new)

Front Fenders L+R $200 pair (midnight purple)

Drivers front fender $100 (gun metal grey)

R33 S2 interior carpet $80

Greddy oil cooler $600

EMS Stinger 4424 $600

Genuine Bosch 1 x 040 $210

Rays short type lug nuts 16 and 4 lock nuts 1.25 m12 Nissan, Red $200

V35 steering wheel $50 no airbag.

Haltech Platinum 2000 with GTR patch loom, air temp sensor and 3 bar map $2270 (brand new)

^^^ only items left.. rest have been sold.

Front Fenders L+R $150 pair (midnight purple)

Drivers front fender $75 (gun metal grey)

R33 S2 interior carpet $50

Greddy oil cooler $600

EMS Stinger 4424 $500

Genuine Bosch 1 x 044 $210

Rays short type lug nuts 16 and 4 lock nuts 1.25 m12 Nissan, Red $180

V35 steering wheel $50 no airbag.

Haltech Platinum 2000 with GTR patch loom, air temp sensor and 3 bar map $2270 (brand new)

^^^ only items left.. rest have been sold.

few price drops..

Hey mate do you still have the ems stinger forsale?

hey mate

yeah its still for sale... if you like give me a call on 0401466244

cheers

johno

Sorry mate, only selling whats listed.

Front Fenders L+R $150 pair (midnight purple)

Drivers front fender $75 (gun metal grey)

R33 S2 interior carpet $50

Greddy oil cooler $600

EMS Stinger 4424 $500 EMS sold pending pick up..

Genuine Bosch 1 x 044 $210

Rays short type lug nuts 16 and 4 lock nuts 1.25 m12 Nissan, Red $180

V35 steering wheel $50 no airbag.

Haltech Platinum 2000 with GTR patch loom, air temp sensor and 3 bar map $2270 (brand new)

^^^ only items left.. rest have been sold.

  • 2 weeks later...
Front Fenders L+R $150 pair (midnight purple)

Drivers front fender $75 (gun metal grey)

R33 S2 interior carpet $50

Greddy oil cooler $600

Rays short type lug nuts 16 and 4 lock nuts 1.25 m12 Nissan, Red $180

V35 steering wheel $50 no airbag.

Haltech Platinum Sports 2000 with GTR patch loom, air temp sensor and 3 bar map $2270 (brand new)

^^^ only items left.. rest have been sold.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...