Jump to content
SAU Community

Recommended Posts

How much oil do I need for the automatic transmission service?

for R33 I will need Castrol Matic 'J but they don't sell this in Australia unless you get from Nissan

so instead I will need Castrol Trans Z which would be compatible

however, one Castrol Trans Z will only have 4L

and I don't know whether I need one or two, or possibly three...

the transmission oil is getting really bad and need to be changed asap so could anyone who had done a transmission service lately be able to tell me how much I need?

also what should I use for the flush and conditioner? brand with good quality/price ratio

if you know the diff oil capacity please let me know as well.

next would be,

does the HICAS actually get influenced by another hidden oil reservoir?

so far my engine bay has 2 reservoir which could be seen, one is the power steering, and the other is brake

but I couldn't find the 3rd one, and these two are not low. My HICAS light is on.

so if you know another 3rd oil reservoir which I should check please post a photo and circle (for R33 Auto Series 1 1993)

thanks and appreciate any reply

I checked the different oils between Castrol, Mobil1 and Penrite

seems like the Castrol Matic J only matches with Castrol Tranmax Z, Mobil ATF 3309 and Penrite SIN ATF 004

the closest would be Castrol Tranmax Z and Penrite ATF 004

the Penrite website states that i would need 8.3L

can someone confirm about this?

I'm assuming you have the 4 speed auto in your R33 (they also came out with a rare 5 speed auto).

If it is a full trans flush - you will need around 7L of Transmax Z. 2x 4 liter bottles.

I don't recommend flushing agents or conditioners as they breakdown your trans fluid.

Ohh finally one reply, thanks iseekool

so far now I have bought 2x Penrite SIN ATF 4L, and then 1x Penrite Dexron III ATF 4L

because there weren't replies, so I just bought the 2x 4L SIN ATF for putting into the transmission

if the mechanic finds it not enough, he will have another 4L of Penrite Dexron III ATF to add a little into (Dexron III is cheaper than SIN)

I checked the specification for the Penrite SIN ATF, it is compatible with Nissan Matic C, D, J and also JASO, so I assume it would be okay because it is much cheaper than Transmax Z :D

and I also bought a Nulon Transmission Treatment

so now you reckon I shouldn't ask the mechanic to add the Nulon Auto Transmission Treatment?

the major service is tomorrow, so I hope someone could reply me today -_-" hahaha

and I didn't buy any flushing agent.....the treatment I am not sure whether it is equivalent to a conditioner.

and yes, it's R33 4 speed auto I guess (since mine is not rare)

cheers

you shouldnt really mix those 2 oils together. and definetly DO NOT put the treatment in unless the unit is fingered. for a full flush i would have bought 3x 4L containers but if its bad like you say possibly 4 containers.

  • 1 year later...
Ohh finally one reply, thanks iseekool

so far now I have bought 2x Penrite SIN ATF 4L, and then 1x Penrite Dexron III ATF 4L

because there weren't replies, so I just bought the 2x 4L SIN ATF for putting into the transmission

if the mechanic finds it not enough, he will have another 4L of Penrite Dexron III ATF to add a little into (Dexron III is cheaper than SIN)

I checked the specification for the Penrite SIN ATF, it is compatible with Nissan Matic C, D, J and also JASO, so I assume it would be okay because it is much cheaper than Transmax Z :down:

and I also bought a Nulon Transmission Treatment

so now you reckon I shouldn't ask the mechanic to add the Nulon Auto Transmission Treatment?

the major service is tomorrow, so I hope someone could reply me today -_-" hahaha

and I didn't buy any flushing agent.....the treatment I am not sure whether it is equivalent to a conditioner.

and yes, it's R33 4 speed auto I guess (since mine is not rare)

cheers

Hi Buddy,

I'm about to change my trans fluid as well, just wanted to check, how did you go with the penrite?

Where did you buy it from? and how much?

Regards,

Rush

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...