Jump to content
SAU Community

Recommended Posts

Hey guys,

Going to be buying the rack end spacers for more lock and thought i might aswell grab the alloy steering spacers aswell while im at it - http://www.gktech.com.au/products/index.asp?ID=159

Anybody have these fitted to their car? Are they worth buying? How do they alter the cars handling/steering exactly?

Just want to basically know if they are something to stay away from or even a must to buy...

Thanks

Link to comment
https://www.sau.com.au/forums/topic/272603-alloy-steering-spacers/
Share on other sites

I think your talking about the rack spacers Nisskid. He is talking about just replacing the factory rubber steering joint with a solid alloy one. It won't change lock.

Yep, thats right.

Soooo.... should i or should i...? What do i get out of em??

It just stiffens up the loose feeling through the steering wheel due to old worn out rubber mounts giving a more direct steering feel. I know people have done it and could feel a difference (in old S13's) so for the price its probably not too bad to freshen up the steering but apparently its a shit job putting it in unless you have the gearbox or motor out. Doable, just a shit job.

Hmm hard to answer. If they know what they are doing I don't see why they couldn't get it done within the hour ($80) but if they put the apprentice on it could end up costing you more.

Unless your installing it yourself it starts to seem like a lot of money to just take a bit of slop out of the steering.

I think your talking about the rack spacers Nisskid. He is talking about just replacing the factory rubber steering joint with a solid alloy one. It won't change lock.

lol oops, i just saw the link to GKtech and knew he sells them.

they basically replace the standard rubber item with a metal one, so u increase the response and get rid of a bit of play in the steering.

Put the spacer in my car today, on a scale of 1-10 of difficulty i'd go with a solid 9, (10 means I had to break out the angle grinder and cut stuff off). I'm an aircraft mechanic by trade so I like to think I know my way around nuts and bolts as well. Appart from the fact it's in a flamin mongrel of a spot and unless you got skinny little arms like me you'll have to do it all from the bottom, the nuts are done up god damn tight. I undid the two bolts with their heads towards the firewall and undid the spline where it goes into the rack uni so I could take the whole shaft out and do the other two bolts out of the car. It would probably be slightly easier to do from under the car as there is a little more access, you do need to get someone to hold the steering wheel though while your undoing and doingup stuff cos the lock on the 32 only engages when the wheel is straight....kinda gay. Oh and to crack the nuts stick a ring spanner on the nuts, hold it and get someone to turn the steering wheel :blink:

post-14136-1243929295_thumb.jpg

post-14136-1243929328_thumb.jpg

post-14136-1243929364_thumb.jpg

worth the effort, and Omurru you got the good spacer, the one you have is the proper designed one,

they are not that hard to do, just have to be willing to stretch the arms and have some muscle to get them out.

i have replaced quite a few of these with the spacers i make.

they are not that hard to do, just have to be willing to stretch the arms and have some muscle to get them out.
unless you got skinny little arms like me

lol maybe thats my problem :) Haven't driven the car yet but will see how we go.

And lol at this forum changing words ( I didn't write flamin mongrel above :rant: )

flaming oath you must have!

these solid mounts make a huge (noticeable) feel to steering response. A+++ would buy again.

easy to do when the motor is out. an utter bastard to do when the motor is in - give it to an unsuspecting mechanic to do :)

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...