Jump to content
SAU Community

Recommended Posts

Time to sell the GTST as I am importing a GTR next year and need to start collecting funds and getting rid the current batch of cars. Its a regretful sale, I have had the car for 2 years and have done 45000ks in it. So here is the description:

1994 White R33 GTST series 1

106000km

Sunroof

GTR Style front bar with genuine clear indicators

Nismo clear side indicators

GTR side skirts

Gracer rear wing (I think)

17x8 rims with Yokohama A539s 235/45

Cusco OS strut bar Front and Rear

Cusco Adj radius rods

Whiteline camber kit (front)

Bilstein shocks all round with lowered springs

DBA 4000 slotted rotors front and rear

Bendix ultimate pads

O2 Race pod filter with UAS cold air box

3in 5zigen cat back exhaust

BOV (not sure what type, was on the car when I got it)

Alpine HU and EQ

3M black carbon tint

Soundstream SA164 AMP

Pioneer 6in speakers Front and Rear

It has been a great car, strict service regime (oil and oil filter every 5000km and major service every 10000km). Have all receipts, spent a little too much on it last year, but it was fun.

Would like $20000, but am open to reasonable negotiation.

EDIT: And it has rego till july next year

Link to comment
https://www.sau.com.au/forums/topic/27270-white-94-r33-gtst/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
×
×
  • Create New...