Jump to content
SAU Community

Recommended Posts

  • Replies 97
  • Created
  • Last Reply

Top Posters In This Topic

hey mate, ive got bendix at the moment and am absolutly sick and tored of them squeeking, untill their warmed up, and am ready to try new pads.

how much for the front pads for a r33 skyline, stock condition. cheers.

posted to adelaide cheers.

Edited by JSTA33

*** Office Closure 31/8 -> 7/9 ***

GSL RallySport will be closed from the 31st August through till 7th September due to our involvement in the World Rally Championship. All orders would need to be placed and paid for by Wednesday this week to guarantee delivery. Office re-opens 8am 8th September.

For all the information on the WRC checkout http://www.rallyaustralia.com

Apologies for any inconvenience caused!

Best Regards,

GSL RallySport

  • 2 weeks later...

Hey Greg, I need a pair of A1RM's for the front of a R32 GTR (non brembo) If you can get hold of them yet.

Cheers, Chad.

Hey mate, Can u let me know how much a set of A1RM pads for the front of a 34 gtr (brembo) are? Delivered to Adelaide to.

Cheers Luke

Hey Greg, I need a pair of A1RM's for the front of a R32 GTR (non brembo) If you can get hold of them yet.

Cheers, Chad.

Hi Chad,

Got them on the shelf, $119, plus $8 shipping. Or else free shipping if you order rears at the same time.

Regards,

Greg

Hey mate, Can u let me know how much a set of A1RM pads for the front of a 34 gtr (brembo) are? Delivered to Adelaide to.

Cheers Luke

Hi Luke,

Rears we've got on the shelf ($179), fronts are currently on a manufacturing back order, but due in 2-3 weeks ($179). Delivery to Adelaide would be $8 for one set of pads, or else free if you ordered both front and rear together.

Regards,

Greg

Thanks mate, if by some miracle they come in and you can get the to Syd before next Wed, can you let me know. Have a track day of Thursday.

cheers

A1RM Fitted to an S14!

I used these pads on my S14... held up well! Similar in pad feel to Ferrodo DS2500s but without the hefty price tag :D

http://nissansilvia.com/forums/index.php?s...t&p=5383135




  • Similar Content

  • Latest Posts

    • Order for the 2025 model R35 GT-R were accepted from 3rd March and 26th August the last order rolled off the production line at the Tochigi plant. Concerning the R35 GT-R replacement, current Nissan CEO Ivan Espinosa said "Nothing has been decided about the GT-R at this time, but we are well aware that everyone is waiting. The GT-R will evolve and reappear in the future. Please be patient until that day comes." Nissan has a lot of issues with management and finances so take Espinosa's words with a big grain of salt. From what discussions I've had and read about here in Japan, not a lot of people are confident about Nissan's future, let alone the next GT-R. 
    • Thanks. We getting some parts along too so he will be solving the speed issue like next week so i will let you know what he came up with.   
    • 21 is explicitly the coils detected as the issue. Is it guaranteed the actual issue? No. Just the ECU thinks it is. When you say rattling, describe it better, get an audio clip as best you can if possible.
    • Yea got me coppers. Bad news is I just put them in and the car still has the light and shakes. I also noticed I hear like rattling coming from the exhaust piping right under me. Does 21 also have a possibility of being O2 sensors?   So, coil packs are good, the harness is good, the MAF is working, and obviously the spark plugs just replaced and working.
    • Make sure you drop the GTT base tune back in, and set your injectors again, this will remove anything playing up with it you may have removed. Possibly lean there as it's normally a fast transient going THROUGH atmospheric pressure, and a turbo motor would then quickly go richer as boost builds. The only worry you MIGHT have is ignition timing, as the DE is higher compression than the DET from memory. But again, you're not in boost, so the DE motor will be a lot more forgiving at atmospheric.   Get Murray, Kinkstahs, and Johnny's input on tuning haltechs, those guys have played with tuning enough in the past to be able to help now you're past the trouble shooting stage of the MAP issue
×
×
  • Create New...