Jump to content
SAU Community

Nice Clean R33 With Big Turbo!-- 400+rwhp

chrisdoherty
 Share

Recommended Posts

chrisdoherty Explorer

chrisdoherty

Posted
Posted

Car is in great condition with a genuine 82000kms. Since purchasing the car i have added a list of tasteful mods to give a great feel and awesome performance while still not attracting a lot of unwanted attention.

Aftermarket sideskirts,rear wing and rear pods,

R33 GTR seats,

Aftermarket steering wheel,

JVC CD/MP3 player,

12" sub with amp,

Fusion speakers,

Push button start,

2x shadow gauges for boost and water temp,

APEXI Multi Checker Engine Monitor (very rare),

Apexi SAFC,

Coilover suspension,

Adjustable caster arms,

NPC button clutch,

LSD,

17"Jap Spec racing wheels,

Drag spec 100mm thick front mount intercooler,

Alloy cooler piping,

Gates racing blue timing belt fitted at 80000kms,

Custom low mount T66 turbo,

38mm external wastegate with screamer pipe,

3" step up to 3.5" stainless exhaust,

Adjustable fuel pressure regulator,

Walbro 550hp fuel pump.

I might have left a few things out but i think thats about it. I have had no problems with the car and it is serviced every 3000kms. Looks good and goes hard! Selling due to need of a 4x4 or ute.

May consider trade for ute or 4x4 of same or lesser value... If you are interested then call or text me on 0402522053 or email me on [email protected]

Car is located in Brisbane.

post-63635-1244339937_thumb.jpg

post-63635-1244340018_thumb.jpg

post-63635-1244340122_thumb.jpg

post-63635-1244340202_thumb.jpg

post-63635-1244340259_thumb.jpg

post-63635-1244340327_thumb.jpg

chrisdoherty Explorer

chrisdoherty

Posted
  • Author
Posted

Car made 349rwhp on only 15psi and 408rwhp on 20psi. Genuine low kms and i have done the 100000km service so there is no need to worry about the hassle of changing belt and idler tensioner and stuff. Put a power fc or other computer and watch the power rise again considerably.

chrisdoherty Explorer

chrisdoherty

Posted
  • Author
Posted

It is in add but a few people have asked me so the car is located in brisbane QLD and asking price is $16000 but price is negotiable. Car will not dissapoint. Once again i will consider a trade for a ute or four wheel drive.

thanks.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Haggerty
      RB25DE NEO with Haltech ECU

      By Haggerty · Posted

      I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • sonicii
      Could it really happen......

      By sonicii · Posted

      I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • MBS206
      Could it really happen......

      By MBS206 · Posted

      Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • MBS206
      R34 25GT Engine Light 21

      By MBS206 · Posted

      Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...