Jump to content
SAU Community

Recommended Posts

hey all i've decided to sell my left overs.. car was stolen last year and these were sitting in my garage at the time:

I have a set of 5 Black wheels with a chrome lip, 17 * 7, 5 * 114.5

I bought these of a fellow forum member last year only he forgot to mention that one of them had a crack in it.

I bought a new one and had them booked in to get fitted, but my car was stolen so i was left with the wheels.

SO i have set of 5 wheels for sale: $900

1 brand new still in box never even taken out,

3 good condition and 1 with a crack in it,

have tires on all except the new one.

no centre caps except for new wheel, i think it looks better without anyway.

post-30788-1244782687_thumb.jpg post-30788-1244782731_thumb.jpg post-30788-1244782761_thumb.jpg post-30788-1244782952_thumb.jpg

This is what they look like on a 32 - previous owners car without centre caps :P

post-30788-1244783110_thumb.jpg

Also have the Stock r32 gts-t exhaust, perfect for clearing defects, good to have just in case: $250

can't be bothered taking pics its under the house, excellent condition, you all know what they look like, however, if you really want pics let me know.

Thats about it, Thanks.

Link to comment
https://www.sau.com.au/forums/topic/274395-17-black-wheels-r32-stock-exhaust/
Share on other sites

the bloke i bought these off said about 80-90% but i would say it's more like 60-80%... still plenty of tred above the indicators.

your welcome to come have a look if you would like.

sorry just realised your from nsw lol...

if it makes it easier for anyone im happy to remove the tire from the cracked rim and fit it to the new rim and just sell the 4 good ones, it'll be cheaper for postage that way.

i can take a photo of the tred left for you if you wish but you can pretty much see there's still tred left in the photo i've already posted

and if anyone wants a photo of the damaged rim let me know also.

  • 1 month later...

hey guys a few clarifications....

did i say 5 x 114.5 PCD lol, of course i meant 5 x 114.3 lol just got lazy and typed this up quickly..

also the bloke i bought these off did say about 70% tread as i just checked my emails... so he was bang on there.

I was also told they were 7.5 wide but they are in fact 7" as it says it on the back of each rim which is perfect for a 32 or 33 but i think the 34's came out with 7.5" stock so wouldn't want to go smaller i would think.

  • 2 months later...

r32 gts-t stock cat-back exhaust - 150

17" wheels, as is ~ 800

soon i will be fitting a tyre to the new rim and getting rid of the cracked one, so it will be the 4 good wheels for sale but price will be less negotiable then... if you buy them now i am willing to negotiate if you take them as is.

thanks.

  • 5 weeks later...
  • 2 weeks later...
  • 2 weeks later...

im not sure mate but from the looks of this r33 exhaust i'd say possibly..

the only thing is the hooks are in the wrong places, it shouldn't be to hard for an exhaust shop to fit it.

post-30788-1258721789_thumb.jpg

not to sure mate but its up to you, if you can't find an r33 exhaust you can give this a shot

cheers.

any ideas if an r32 exhaust will fit an r33? need to clear an epa notice for the second time
  • 2 weeks later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah I've had too many issues with knock off's on the BMW's. I don't want to do a job twice or more because the parts are shit.
    • I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
×
×
  • Create New...