Jump to content
SAU Community

Eoi: Twin Catback Exhaust System

SLY-25T

By SLY-25T,
in Wanted to Buy

 Share

Recommended Posts

SLY-25T Mentor

SLY-25T

Posted
Posted (edited)

Just want anyone to express their interest in my catback exhaust. Really would like to swap it for a 3-3.5inch catback with a cannon. Prefferably with a muffler so its not over the top loud. I'm looking for somethings with a bit more of a note for my car.

This catback is nice and sedate but opens up when on WOT.

I've been told its a Fujitsubo/JASMA exhaust system that is a different design to any i have seen. AFAIK its a twin 2 1/4 system. It did have 3 hotdags all up but i had two removed to give it a slightly louder note. The third hotdog is there to slow the gases in the shorter pipe so they exit at around the same time as the ones in the longer pipe. The twin pipes then enter the JASMA branded muffler. When i got it, it had twin DTM tips the swooped up. I had these changed to straight exit pipes and had the exhaust lifted a touch to minimise scrapping.

Well this is alot of blabbing so ill just chuck up some pics.

post-53838-1245754836_thumb.jpgpost-53838-1245755071_thumb.jpgpost-53838-1245755094_thumb.jpgpost-53838-1245755119_thumb.jpg

^^ last pic the exhaust is lop sided because its off one of the hangers

If you are interested, send me a PM with pics of your exhaust and ill consider. still not 100% but want to know what kind of interest the exhaust gets.

Edited by SLY-25T
Link to comment
https://www.sau.com.au/forums/topic/276157-eoi-twin-catback-exhaust-system/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      spot the stagea

      By Duncan · Posted

      roof rail delete used to be a thing, they were made locally for a while too
    • AnimalGarage
      spot the stagea

      By AnimalGarage · Posted

      I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • AnimalGarage
      Can you mount the ATTESA pump in other locations?

      By AnimalGarage · Posted

      According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • GTSBoy
      R34 25GT Engine Light 21

      By GTSBoy · Posted

      If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...