Jump to content
SAU Community

Recommended Posts

hey guys i might be close to buying a car from these guys, going to inspect it today, just wondering if anyone has used them or bought a car from them before, i think there located in Australia street, camperdown, NSW, its like a garage/warehouse will all there cars in there, they are an importer.

any good or bad news about them i should know about before dealing with them??

Link to comment
https://www.sau.com.au/forums/topic/276640-allpeoplemover/
Share on other sites

nah i think there different, these guys (Allpeoplemovers) are are located a 25 australia street, camperdown. the other guys are Japlink/allimports located at 175 parramatta road haberfield, pretty sure there different places.

Link to comment
https://www.sau.com.au/forums/topic/276640-allpeoplemover/#findComment-4682181
Share on other sites

Dont be fooled, its the same company.

**Edit by Mod**

See the other thread as linked above.

Who knows - their current cars may be OK - check them out for yourself and make a decision.

http://www.allpeoplemover.com/zoom.php?id=153

http://www.allimports.com.au/view/detail.p...&car_id=261

Link to comment
https://www.sau.com.au/forums/topic/276640-allpeoplemover/#findComment-4682470
Share on other sites

Your buying a car not a percentage of the business, concentrate on the car.

I'm not but, if a business is shit your not gonna go buy there products are ya?

anyways i will be going tomorrow looking at the car, checking out the common problems and getting a copy of the auction sheet which hopefully someone on the forum could do a quick translation on it.

Link to comment
https://www.sau.com.au/forums/topic/276640-allpeoplemover/#findComment-4682517
Share on other sites

I'm not but, if a business is shit your not gonna go buy there products are ya?

anyways i will be going tomorrow looking at the car, checking out the common problems and getting a copy of the auction sheet which hopefully someone on the forum could do a quick translation on it.

Make sure the VIN on the sheet matches the VIN on the car.

Dont worry too much about a translation, just look at it yourself - Check the grade on the sheet (4 or 5 is good, anything else especially "R", just run..). Look for X's on the picture of the car (means replaced panels).

Link to comment
https://www.sau.com.au/forums/topic/276640-allpeoplemover/#findComment-4682525
Share on other sites

Make sure the VIN on the sheet matches the VIN on the car.

Dont worry too much about a translation, just look at it yourself - Check the grade on the sheet (4 or 5 is good, anything else especially "R", just run..). Look for X's on the picture of the car (means replaced panels).

will do mate, when i called up they said it was a grade 4B. ill do all the checks now VIN and all. Im gonna go through the topic posted called Common Problems on the v35 and check them on the car as well plus some other Used/new car buyers check lists iv researched on.

Link to comment
https://www.sau.com.au/forums/topic/276640-allpeoplemover/#findComment-4682538
Share on other sites

25 Australia street is the same mob as Allimports, and all those private for sale ads on carsales, jimmy and all other names he's known by.

ALso something I was told by a mechanic who was checking a private sale car out for me was that Japlink which are next door(same car lot but theres a fence seperating them) to the Allimports yard on Parramatta road, are not associated with each other, apparently the Allimports guys had a deal with the previous owner/s of Japlink and that the new owner of Japlink had to honour an existing deal with Allimports on sharing the lot and he also wouldn't comment on Allimports, just smiled and nooded his head when I mentioned them and the supra and rep they have.

If anyone knows otehrwise please don't shoot me down, just relaying something I was told by someone who appears and presumably is independent.

edit:also i recommend reading evolutionoz for another view.

Edited by crumbly
Link to comment
https://www.sau.com.au/forums/topic/276640-allpeoplemover/#findComment-4682670
Share on other sites

I'm not but, if a business is shit your not gonna go buy there products are ya?

anyways i will be going tomorrow looking at the car, checking out the common problems and getting a copy of the auction sheet which hopefully someone on the forum could do a quick translation on it.

It's a Nissan product not theirs..... As I said concentrate on the car, if the car is right the rest doesn't matter.

It's not like a new car when parts/service and warranty come into it. Just buy the "best" car you can for your dollar.

Link to comment
https://www.sau.com.au/forums/topic/276640-allpeoplemover/#findComment-4685503
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
×
×
  • Create New...