Jump to content
SAU Community

Recommended Posts

ok bought new hose clamps retensioned everything and checked all the pipes... went for a drive was still running somewhat unwell everytime i got to about 4000-5000rpm the bovs would just go off even with my foot flat?? does this still point to a boostleak issue?

edit: just pulled off bov's and there is a difference between the 2... one is marginally stiffer than the other ?>

cheers chad will do tomorrow.. had enough for today.. just took it for a run with bov's off and pipes blocked... still running like a pig... guess ill have to look harder and check absolutely everything.. man this is pissing me off

ok here is where i am at... double checked all ic piping, removed and blocked bov's plus vacumes. checked nearly every other vacume hose... not popping asmuch but still feels gutless and its still struggling under boost... even thought bov's are removed it still lets off and makes a chatting noise even when im giving it throttle.. and no this sound isnt flutter its a slow chuw chow chew chow sound

**edit** just took an old sau member crimmo for a cruise and he said it sounds ignition relation.. injector duty was down around 25%.. he said i may have fried my plugs at mallala or my coilpacks are cooked... anyone got some coil packs i can borrow for a couple hours?

Mark, I've got 7 or so coil-packs lying around - not sure if they're all 100% good, I did replace them for a reason but you're welcome to borrow. As a side note - have you checked your vacuum/boost pipes that run to the wastegate cans? When I had my 32 GTR one of mine blocked up and caused the BOV(s) to flutter continuously under boost (and also caused over-boosting), wasn't exactly easy to diagnose though.

Edited by 32godzilla

u could just be a life saver.... coil pack borrow would be amazing more than happy to exhange a 6 pack.

by vacume boost pipes?? you mean the vacume pipes that go to the actuators? they were replaced a few 1000 kms ago but ill check tomorrow when i check the plugs.. the symptoms your talking about sound soooo simialr to whats goin on with my baby atm

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...