Jump to content
SAU Community

Recommended Posts

Hi guys,

Putting my Nismo 480cc injectors up for sale. Top feed, 4 hole spray pattern, very nice atomisation.

Should be good for 300rwkw, and could be pushed a bit if you are also running an adj fuel pressure reg

I got these second hand from japan (off a Z33) and i would have only used them for say 1000km's, if that even.

Worked flawlessly, no issues what-so-ever and installed and taken out by the boys at Status Tuning. No diy, only the pro's installed/uninstalled these.

Very hard to find and one of the few good options for the NEO RB25DET. 4 hole spray pattern is much nicer than the sards, etc - ask your tuner :)

Price: $750 (check out the brand new prices of these, $1300+)

IMG_0464.jpg

IMG_0469.jpg

IMG_0471.jpg

the boxes are just the ones they came with from japan.

cheers,

daniel

Link to comment
https://www.sau.com.au/forums/topic/278592-r34-nismo-480cc-injectors/
Share on other sites

switched to E85 and which means it's running approx 30% more fuel - doing figures like 480cc = 480hp = 358kw, less a bit for drive train = 310-320rwkw

that's ok for pump fuel, E85 won't fit into that equation unfortuantely - so up i went. Bit disappointing to lose the nice spray of the Nismo's, but trade off in idle/tuning and probably consumption had to be made.

PM sent

  • 2 weeks later...

yup :) One of the VERY few NEO/350Z options that lets you drop them straight in. Old ones out, new ones in. Finished (well, then tune)

No spacers, no different plugs/resister packs, no need for new fuel rail, blah blah. Just out and in

i know RB20DET's are top feed, but i wouldn't think these would fit directly. I've never seen it mentioned before.

eg. R34 GTR injectors are top feed, but won't fit in the NEO RB25 (well, won't fit directly)

i guess you could make them fit, but you might need to search the 'forced performance' section to see what needs to be done. Who knows, might be an easy fix

cheers,

daniel

will have to check my records :down:

tuning time depends on if the car plays ball :bunny:

you can install them yourself, but you'll either have to tow the car to the tuners, or play with your ECU if you've got control over it, just enough so you can drive the car to the tuners.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...