Jump to content
SAU Community

Recommended Posts

Item: Nissan silvia s13 1989 club Q's

Location: Toowoomba will deliver to Brisbane or Coast for the right price

Item Condition: The car is in average condition for it's age.

Reason for Selling: Bought a r33 and need money to mod it. Lost interest as well.

Price and Payment Conditions: $7000 but make and offer you might be surprised. Will also accept engine and suspension parts to suit r33 for full or part payment depending on value and quality.

Extra Info: Ok the body has a few dents nothing to bad mainly all the size of a 50c piece needs the roof resprayed and a new bonnet (I can find a new bonnet for it if needed). It was originally a manual ca18de. It still needs a little bit of work all in all it's 85% complete.

With the car comes a link ecu and hand controller, Gtr cams and injectors, cam gears, T3/T4 400hp turbo half roll cage, full adjustable tien coilovers, track rods and tie rods, aftermarket stainless plenum and highmount manifold.

That's all I can think off at the moment I will add anything else i can think of.

All that's left to do is bolt some parts on get cooler piping, exhaust fabricated, mod plates and tuning.

1247423912.jpg

1247470768.jpg

1247398369.jpg

1247453419.jpg

1247415061.jpg

1247447326.jpg

1247391269.jpg

Contact Details: PM or post in the thread i will check the thread twice daily.

Note: The car is being sold as a project as is. It is complied but not registered or roadworthy.

Link to comment
https://www.sau.com.au/forums/topic/278820-s13-silvia/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...