Jump to content
SAU Community

Wanting To Buy R32 Or R33 Auto/turbo

ozzigstar
 Share

Recommended Posts

R33 gtst series Enthusiast

R33 gtst series

Posted
Posted
Hey guys im looking for an R32 or an R33 has to be auto and with turbo,with rego and RWC i have 8grand to spend im located in melbourne

I have exactly wat ur looking for and im in melb,

Its on carsales: TYD-682

We could come to an agreement, :D

kaleh Apprentice

kaleh

Posted
Posted (edited)

hi ozzigstar..

i have a '97 r33 gts25t series II.. but it's got minor problems. Willing to sell it for very cheap..

http://www.carbuddy.com.au/buy/cars.aspx?s...0&mid=52662

i hope the link works..

problems:

- sunroof doesn't work. gotta manually shut it

- the clear is peeling off the bonnet

- head lights needs to be polished/cleaned

- front brakes are squealing

- few little scratches

- chip on windscreen about 5cent piece

it's complete stock. All services done at EAS performance by George. Mongoose alarm 3 point immoboliser bought and installed @ Stylyn.

If you're interested let me know... will work out a deal!

Edited by kaleh
anthony123 Enthusiast

anthony123

Posted
Posted

Hey buddy, got a black 1998 Series 2 R33, comes with a turbo back exhaust (trust), pod, boost controller on 10psi, Car is registered and comes with rwc, located in melbourne, shoot me a pm if your interested

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Chupapy
      Coolant leak?

      By Chupapy · Posted

      Is it alright to top up with just another green coolant?
    • Songo
      New kid on the block

      By Songo · Posted

      thanks GTSboy. My confusion at the moment is i am trying to locate the ignition, ECU battery power and the ECU negative The closest thing i can find is the for the S15 on Page 8 of the Wiring Specialties web page https://drive.google.com/file/d/0B9F33_M_GgENQnZ6STMxVmVNd1E/view?resourcekey=0-eZ4nNRwRoqa1qvKlWWHm8A I cannot find the same diagram for the R33 RB25DET Series 2 dash plug pin out.... Do you know what the Pins? or know where i can find the same pinout diagram for the RB dash plug? Thanks for the advice on the box... i like a 6 speed so might be on the lookout or the box now.. a topic of discussion for another post...
    • Chupapy
      Coolant leak?

      By Chupapy · Posted

      Will have a look at that. I cant see any leaks 
    • GTSBoy
      Coolant leak?

      By GTSBoy · Posted

      Put another overflow bottle (ie, a 1.25 coke bottle or similar) under the overflow hose and see if it is being pushed out there or if it is disappearing into the engine.
    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      Staring on a stand is no issue. You just have to wire everything up, give it fuel and cross your fingers that the stand is robust enough. Arranging the inlet plumbing is often the hardest part, without any surrounding structure to hand some of it from. No need for coolant if you only want to run it for <1 minute. As to the gearbox - I think the little Aisin box is a bit stronger than the other small Nissan boxes that went behind SRs, but I wouldn't be too keen to test its limits with the torque of a boosted 25. I don't know if you can retain the box and the tailshaft. The box won't connect to the RB without an adapter of some sort, which is either a plate that will push the engine forward (which is not good for fitting it into the bay's available space) or push the box back, which messes with the box position and tailshaft length - OR - cut and shut work on the bellhousing, which is a long way from "least modification". I'd be buying a new 370Z 6 speed or similar, doing what has to be done to that to make it fit RB (ie, cut and shut bellhousing) and the requisite tailshaft custom/mods.
×
×
  • Create New...