Jump to content
SAU Community

Recommended Posts

Looking for a set of shocks and springs or coilover for an R32 GTR. Doesnt need the best as I will only need it to last a year or so till I can afford to put on a new set.

Not looking for leaking or knocking suspension as it would be worse then my current ones.

Pictures would be nice.

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/279415-r32-gtr-suspension/
Share on other sites

Pair of Nismo GTR R32 rear progressive rate spring units, and, a pair of Trust brand adujstable damper with progressive rate springs.Come off a R32GTR 1993

The Pro springs start off at approx 6kgs, then stiffen up to 8kgs under load, so not super hard bone shakers, but when driven quickly, they get stiffer.

No leaks/knocks, very clean, no paint chips etc.

$400 the lot ( all four)plus postage!!!, or,

I can deliver to Sydney (Oran Park Raceway) next weekend, you will have to meet me there to collect them!

will require bank deposit as I'm not gonna cart them all the way there for a no-show

  • 3 weeks later...

Still interested in any offers. Dont really need springs, just struts. Coilovers are ok, but prefer struts. Would help if you supplied a picture and please dont offer me standard shocks, ive already got 3 sets and they are all rooted.

Cheers!

I've got some KYB coil overy type things. In a box at work so can't really show you them now. I'm not sure how old they are but they were on my R32 GTR when I got it. I've upgraded to DMS 50mm. The KYBs worked fine and aren't leaking etc. Perfectly serviceable. Let me know if you want to know more.

hey mate,

dont know if its wat your aiming for but i have a full set of r32 gtr JIC flt a2 coilovers in immaculate cond, willing to post em at your expense for $ 950 firm as i payed $1500 from an importer and ended up selling the car before i could fit them, pretty keen to just get rid of em.

if ya keen mate call me on(08) 82432250

cheers nicko

Pair of Nismo GTR R32 rear progressive rate spring units, and, a pair of Trust brand adujstable damper with progressive rate springs.Come off a R32GTR 1993

The Pro springs start off at approx 6kgs, then stiffen up to 8kgs under load, so not super hard bone shakers, but when driven quickly, they get stiffer.

No leaks/knocks, very clean, no paint chips etc.

$400 the lot ( all four)plus postage!!!, or,

I can deliver to Sydney (Oran Park Raceway) next weekend, you will have to meet me there to collect them!

will require bank deposit as I'm not gonna cart them all the way there for a no-show

Helios, these are still available, I coulda got them to Southern Sydney suburbs for you last month if you were able to collect.

Still $400 plus now $90 for postage/freight

  • 2 weeks later...

Hey,

Still in the market for some suspension.

If you post on this thread, please be prepared to supply pictures and to reply. Please if possible let me know if the suspension will lower the ride height.

dat2kman: Please send me pictures as the photobucket of the front Trust ones has disappeared.

Cheers!

Paul

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...