Jump to content
SAU Community

Recommended Posts

ok,

this is probably a really stupid question, but i was wondering the best way to rip a fat burnout in a manual.

Auto V8's are easy... doesnt take a brain surgeon to work that one out... but i want to be able to rip a fat burnout in a manual, without shifting off the original line.. any suggestions.

i have found a few different ways, but none are perfect and most the tail likes to step sideways a bit when im doing it...

dave ;)

Link to comment
https://www.sau.com.au/forums/topic/28109-burnouts-d/
Share on other sites

I'm going to assume that this question is in regards to burnouts when warming tyres at a legal drag meet.

1. Push clutch in

2. Select a gear (1st is simple but 2nd warms up better)

3. Build up the revs to a nice high rpm. I recommend 8,000.

4. Drop the clutch and quickly move foot from clutch to brake.

5. Heat till satisfied.

6. Serve hot.

;):D:D:D:D:D:D

It's difficult to stop the back from sliding out, but it's something you just need to live with ;)

Link to comment
https://www.sau.com.au/forums/topic/28109-burnouts-d/#findComment-585363
Share on other sites

lol... the colt.

OR... adding to leewah (which is by far the easiest and most effective)

You can use heel/toe.

Use your toe to build up revs... then put down the brake... then bring off the clutch.

It's just easier to do leewahs ;)

Link to comment
https://www.sau.com.au/forums/topic/28109-burnouts-d/#findComment-585448
Share on other sites

I know what leewah has - but the person asking the question doesnt have what leewah has - get it?

Telling someone to launch at 8000 revs when their car doesnt go that far [from factory] doesnt make sense...

anyway who cares - I have a STAR ;) !!!

Link to comment
https://www.sau.com.au/forums/topic/28109-burnouts-d/#findComment-585719
Share on other sites

oh also, when you do this at the drags, how much tire tread does it take off... cos i reckon i took about half the tread off these brand new (3000km) tires in 4 or 5 burnouts.

Thanks - just wanting to know so when i get back to melb i can push the liner into a high 13 for my first ever official drag.

Link to comment
https://www.sau.com.au/forums/topic/28109-burnouts-d/#findComment-585898
Share on other sites

Originally posted by NismoR34

I know what leewah has - but the person asking the question doesnt have what leewah has - get it?

Telling someone to launch at 8000 revs when their car doesnt go that far [from factory] doesnt make sense...

anyway who cares - I have a STAR :P !!!

my 33 hits 8000rpm (rev limit set at 8500 for some reason) but i dont think i will go that far.. in my pissy 205 tires i only need to dial up 4k..

now getting a v8 up to 8k and dropping , that could be fun.. thats about 3000rpm over the red line :P

Link to comment
https://www.sau.com.au/forums/topic/28109-burnouts-d/#findComment-585908
Share on other sites

ok im back in here - for a minute.

I still dont think its reasonable to advise people to launch at 8,000rpm - thats my point, always has been my point. And 8,000 rpm wont be necessary or possible on the average "forum user's" car!

As I said, mine will do burnouts easily launching from 3,000 - 5,000rpm so why bother with maxing your revs out just on launch? Its going to climb up to the max rpm very quickly in 1st or 2nd anyway...

Dave I think I can safely assume you are not in the category of having:

A: A GTR

B: An RB26

C: A Worked RB26

D: A Huge Aftermarket Turbo hanging off an RB26

E: A 700HP+ engine

Maybe I am wrong. This type of setup probably does need much higher revs than your average liner to invoke wheelspin, though I am sure its fun!

My main point is I think YOUR original question [the reason we are in this thread] wasnt answered effectively, thus I tried to help. I also think a lot of other forum goes will be looking in here and trying to learn from the Q&A's

/end rant

HKSgtst - hover your cursor over the star and some magic will happen :( Works differently depending on star colour ;)

Link to comment
https://www.sau.com.au/forums/topic/28109-burnouts-d/#findComment-586705
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
×
×
  • Create New...