Jump to content
SAU Community

Recommended Posts

I'll be in contact this week about ppl's cars. Just flat out at the moment with other shit.

hey, could I get in touch with you sometime soon, to roll 4 guards on my stagea?

rubbing with the 9.5's on all-round, want to get it sorted prior to the 26th track day.

are you able to help out? Im free anytime basically being out of work,

but if you dont want to "pimp my guards?, can you perhaps suggest someone down south who can roll guards?

cheers mate

  • Replies 52
  • Created
  • Last Reply

Top Posters In This Topic

i got my own painter for small things like my kit, but if i was gonna get some crash work/flares/etc done, id probably go and see all type with all the good things i hear and see out of there.

well I did my rears today. fronts are fine as is

the 17x9.5rims now feel fantastic thru the twisties, the 235/45/17 tyres stretched but now not hitting the inside lip

jacked the rear up, took off the rear rims, tapped the rear lip edge up, then hit the inside rim fold with a rubber hammer and a solid hammer

ended up folding the inner guard lip into itself, but got a bit of paint peal chipping off.

minor enough, but enough to justify a full paint touchup next year, to repair the mirror rust, rear bar crack and bodywork chip/stone damage.

so yeah, just by folding the rear guard lip into itself the tyres now dont scrape thru the hard corners.

next week it gets a tune, so will also tighten up the swaybars to max setting.

zwheel.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...