Jump to content
SAU Community

Recommended Posts

large1063.jpg

large178.jpg

Hi All,

The Tuners Group is very proud to announce the availability of a brand new quick release from Works Bell, the Rapfix QRS ...

large1059.jpeg

Following on from the massive success of the world reknowned Rapfix II, the brand new Rapfix QRS was announced today by Works Bell in Tokyo.

Like all Works Bell's other world class high quality quick releases, the Rapfix QRS is manufactured in Japan with true Japanese machining precision.

large1058.jpeg

The Rapfix QRS consists of two parts as shown above:

- the steering plate which you attach to your steering wheel

- the Rapfix QRS body which is attached to your steering boss kit.

Incredibly compact - Just 25 mm thick

large1064.jpg

For some other companies, it is near impossible to achieve the goal of designing a quick release that features easy operation with no shakiness or play.

However, the Works Bell Rapfix QRS achieves these goals by utilizing the lever, cover and ball lock system.

In addition, it allows the driver to maintain a comfortable seating position due to it’s very compact low profile design with a thickness of just approx 25mm (1 inch) !

Two foldable levers are designed to make the turning of the cover simple. It is also a safety device because the cover cannot be turned without moving the lever.

Steering Wheel & Hub / Boss Kit Compatibility

There is no welding required to fit a Works Bell Rapfix QRS Quick Release to your car - it is strictly a bolt on product with no welding required.

At the steering wheel end, the Rapfix QRS ships pre-machined with bolt holes in both standard 6 bolt Momo bolt pattern steering (PCD 70mm), and 6 bolt Nardi bolt pattern (PCD 74mm), so it is compatible with a very wide range of steering wheels from a number of manufacturers including Works Bell, Momo, Nardi, Personal, OMP etc.

The part of the Rapfix QRS that attaches to the steering boss / hub has a 6 bolt (PCD 70mm) bolt pattern, the same bolt pattern as used on Momo steering bosses / hubs.

We can supply a steering boss kit / hub to suit for almost any vehicle - please see the steering hubs / boss kits section of our website and contact us if a boss for your car is not listed.

Alternatively, if you already have a 6 bolt Nardi bolt pattern steering boss / hub (PCD 74mm), then the part of the Rapfix QRS that attaches to the steering boss / hub can be attached to many compatible 6 bolt Nardi bolt pattern steering bosses / hubs, by using the Works Bell Conversion Spacer.

MORE INFO AND PRICING

We are now accepting orders for the brand new Rapfix QRS.

Please see this page on our website for pricing, more product information, photos etc ...

http://www.tunersgroup.com/Online_Store/Rapfix_QRS.html

- The Tuners Group

This might sound like a bit of a silly question - but with the legality issues of running a non-airbag steering wheel on a car that came with one from the factory - are there any options for using a factory / airbag equipped wheel with a quick-release system?

are there any options for using a factory / airbag equipped wheel with a quick-release system?

Virtually every car uses a different method for mounting the factory airbag steering wheel, so there is no commercially available system that I know of to use a factory airbag steering wheel with a quick release.

- The Tuners Group

Do these work with the horn connected? or Do you need to disconnect the horn wire before removing?

Do these work with the horn connected? or Do you need to disconnect the horn wire before removing?

Yes the horn still works.

As it says on our website at ...

http://www.tunersgroup.com/Online_Store/Rapfix_QRS.html ...

Your horn still works

The electrode installed in the plate and Rapfix QRS body, when aligned together in the “attached” position allows full operation of the horn button.

The electrical connections for the horn in the Rapfix QRS automatically engage when the steering wheel is attached.

large1058.jpeg

The part on the right in the photo above is bolted to your steering wheel, and the red wire is connected to your horn button on your steering wheel. If you have a look at the part on the left of the photo above, at the lower left centre you can see a copper electrical contact. That contact automatically engages with the part attached to the steering wheel, so the horn still works.

- The Tuners Group



  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...