Jump to content
SAU Community

Official Thread *** Victorian Drift Club Practice Day ***


Recommended Posts

ALL SPOTS ARE NOW FILLED!

Thank you to those that pre-entered :)

What time does the gates open and what time is scruitenning n stuff?? And like what time does it get over??

Couldnt find this info on vicdrift also!!

What time should i be there !!!!

Gates open around 7:45am, scrutineering opens at 8am. Track closes at 5pm but usually if there is alot of crap on the track it closes earlier and we sweep the track..

(Especially given its a saturday event.. There will be a track day on the sunday)

You can always pm me for info.. im a one woman show when it comes to updating the info area of the vic drift forum and sometimes simple details skip my mind as i simply assume people know stuff like that as its the same at every event :) my bad..

see you guys on saturday :) Anyone wana wash my car?! :lol:

Hmm so theres no point if i come early and bring my car on the trailer because i havnt pre booked or anyhting... Is it still cool if a few of my boys rock up?

It was probably the most fun I have had at Winton. Tandems with mates are always the highlight. The 33 drove the 5 hours there, drifted all day on the limiter then drove the 5 hours home again. Lost track of how many times it has done it!

The only thing that could have made it better was if the lazy bastards who didn't pre-enter were not let in and there for more track time for those who made the effort to pre-enter. There was no excuse really... it was plastered over all the main forums and the 70 other people all some how knew about it.

I am all for the 60 car limit.

Dean, your car look fantastic out there.

Gunmetal, your car was also looking the goods.

I've got over 2000 photos to go through the next few days and get them up, was going to start them lastnight but i was sick and in bed by about 7:30 :banana:.

Dean, your car look fantastic out there.

Gunmetal, your car was also looking the goods.

I've got over 2000 photos to go through the next few days and get them up, was going to start them lastnight but i was sick and in bed by about 7:30 :(.

Thanks mate, it also felt fantastic. Those guys at centreline really know how to setup a car.

I have some seriously good in cam footage to show... keep an eye out on youtube :) Will advise once its up...

I had one of the best times in my life... The event was organised really well and the winton guyz wer really helpful.. I hardly managed to get any pics so waiting for someone to put it up... Made alot of new friends also..↲

Hey gunmetal i would like to see some of ur in car footage

I will post it up when i get a chance. My camera was acting up so not sure exactly how much I actually ended up getting.

It was nice to meet you Zaver but a word of advice- you gotta be real careful and keep your eyes out when you spin or go off track! One time you went off the track behind the front bunker and a group of 5 of us came screaming around on to the front straight only to have to all brake and spin our cars because you pulled back on the track in front of us when you should have probably waited until we had passed.

Just be aware of what the cars in front of you and behind you are doing and maybe get a bit more practice in before jumping in the tandem line.

How did you go with your bash plate anyway?

Edited by gunmetalgrey

Well i guess i was a little excited on the day!! Will keep that in mind for the next time...

And abt my bash plate its still hanging i really have to get it fixed just havent gathered any time for it... Well maybe ill go see a metal customizer for sm info on it... Do u know the guyz name who did urs ??

http://www.gktech.com.au/products/index.asp?ID=137

That is what I would recommend. Mine was just bent up by a local metal fabricator and cost $20 but it's no use really giving you his name as he is 4 hours away from you. The s13 was exactly the same as the R33 except different bolt holes were needed so I presume the R34 would be similar with different bolt holes needing to be drilled.

http://www.flickr.com/photos/ch4ser

Some good pictures of your 33 in there Dean

http://www.vimeo.com/6489483

iDrifts video

Yeah, those shots were taken by my mates dad - guy with the chaser. Some really nice shots in there. Cant wait to see the shots from the professional photograpers that were there. Have any been put up yet?

Me and my mate with the chaser both had video cams bolted to our rear parcel shelf. The footage is fantastic, I will advise once its up on youtube...

Dean, i got your PM.

Mine will be up around 5pm tonight, had a few problems uploading the other day so basically had to start again, my ISP is going to rape me this month :P

That chaser was mint too, was he at the beginners section at the Round 2 event?

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
×
×
  • Create New...