Jump to content
SAU Community

Recommended Posts

Looking very clean man, good stuff! :)

I went to Repco yesterday for some quotes, the guy said that the car isn't listed on the paper. He suggested I go to Bilstein on the Princes Highway. Took a trip there, the mechanic had a little doze off looking at the car haha and then recomended some things to do with it, then took me to the office to get some quotes.

x4 Bilstein Shocks - $1350

x4 King Springs - $400 (He said he can get Tein Springs in for a little extra, not much though, said it was like within 10%)

x2 Sway Bars - $400

How is that sounding?

EDIR - Oh and they charge $600 for labour.

Edited by Turk1
  • Replies 50
  • Created
  • Last Reply

Top Posters In This Topic

Also I got a sound system in the boot of my car so the back sits lower than the front which is understandable....however the front of my car is WAYY to high for my likings. Could this be because the suspension is to soft? Will the above suspension setup fix this? Or like is there sometihng else I should be doing? Becuase its sorta bugs me eveytime i see it lol...

Edited by Turk1

$2750 sounds about right there. The shocks are expensive because there Bilstein but they are the best shocks. Only thing i would look into is the springs if you find some good ones for 600 its still under $3000 :mrt: .... $2950

the labour is good price if it includes a tune to suit the GTS-4

Ok well I got another person I am going to call tomorow for a quote. Can I ask something though...don't know if I am going to get flamed for this lol but what if I go for just the coils and the sway bars with the stock shocks?

the coils will lower your ride so you will be closer to the ground and therefor better control.

Swaybars are always an awesome mod, there probably better than shocks. Still shock would complete it.

Definately going to get some swaybars, heard alot of good about them. I'll see how I go with money...also, a member on the forums is selling some HKS coilovers...i am interested in them but also double minded becuase everyone says there not the way to go for a daily.

d2 coilovers are 10kg at the front and 8kg at the rear...........not even track skyline have shocks rated that high, the reason i said is because these anodized coil overs are to heavy for Aussie roads. Read up about coil overs on the suspension forums, they will give you the info on whats good for its money and whats not.

I agree it would defiantly work out a lot cheaper but i doubt the handling will be half as good.

d2 coilovers are 10kg at the front and 8kg at the rear...........not even track skyline have shocks rated that high, the reason i said is because these anodized coil overs are to heavy for Aussie roads. Read up about coil overs on the suspension forums, they will give you the info on whats good for its money and whats not.

I agree it would defiantly work out a lot cheaper but i doubt the handling will be half as good.

you can get them with lighter springs if you want, mine are alot lighter, like 6 and 4 kg...cos yeah we arnt allowed to use the heavy track set up on public roads either, and you can adjust the spring stiffness quite alot within its weight range, ive driven a mates mitsu GTO with tein shocks and its rock hard compared to my set up. personally i think my handling is very good, D2 are also very stiff laterally, i reckon their great value for the money

in that case then if you can change the spring no problem then they would probably save lots of money. Still prefer Bilsteins for the handling but 6kg and 4kg is a massive improvement for there 10kg, 8kg setup.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...