Jump to content
SAU Community

Recommended Posts

Hi All,

I'm doubting I'll get much interest in this kind of vehicle on this site, but I thought I'd try just in case!

Ideally, I'm looking for swaps for any of the following:

S14 S2 200sx

S2 Stagea

Or the right R33 (again, must be S2)

So if you've got any of those and you're interested, give me a yell!!

1997 EL Falcon Futura sedan

-Red in colour

-Grey interior

-Auto

-ABS (have pulled fuse for more predictable on the brakes spooling/burnouts)

-Cruise control - still there and working, just need a factory bracket to hold the cable to the rocker cover.

-Tinted windows

-Power front windows, Remote central locking etc

The car itself is in tidy, clean condition. It's not perfect, but that's all part of the sleeper theme. Has the usual scratches and dints that you'd expect for a 12 year old car, but the paint is quite shiny.

Interior is good condition. Only modification in the interior is a boost gauge under the ashtray, which is fairly discreet.

Mechanically it has a freshly rebuilt bottom end and head, has prepped rods, ARP stud kit and a few other touches that I can't quite remember. These engines, even in standard form, tuned correctly are known to hang together with big power.

6Boost exhaust manifold,

50mm wastegate,

T04Z spec turbo with a beanie.

Bleed valve to adjust the boost.

3" mandrel bent exhaust from the turbo back. The tip is even squashed oval just like the factory one, so you can't tell is has an exhaust. It's fairly quiet too.

600x300x75 cooler. This is currently unpainted, but as it sits very neatly inside the standard bar, it's not particularly noticeable. I do have the factory mesh to put back in front of it though, and I was planning to spray the cooler matt black.

The piping under the bonnet has been painted black to look as standard as possible.

Fuelling consists of:

GRA LPG setup consisting of an S480 throttle body, twin B2 converters, twin lines all the way to the tank and "hi flow" lock offs.

The petrol system is still present and working. It runs very well on petrol, but as it's the standard pump, injectors etc you can only cruise off boost. It's still very handy for when you run out of gas, or can't be stuffed filling up!

This car is cheap as to run, and costs me less than $10 per 100km to run!

Ignition:

Crane Hi-6 MSD Ignition and LX92 coil. I've mounted the Hi-6 setup inside the passenger kick panel to keep it dry and safe.

ICE 9mm Race leads

Custom tuned ignition map via a J3 chip in the factory ECU. Map sensor has been modified to bypass boost.

Auto has been rebuilt with extra clutches and has a mechanical shiftkit, which is not too firm to be a pig to live with. Currently has the standard stall. I do have a 3000rpm converter, but I haven't got around to putting it in yet.

Diff is the standard 3.08 ratio (excellent for loading up the turbo and helping it spool early) with a mini-spool.

Suspension is stock as a rock all round, which helps it hook up well.

The entire build is less than 6000kms and 6 months old! I'm only looking to sell as I hardly use it, and I would like to get myself back into a Nissan turbo.

The car is currently putting out 303rwkw. There is room for more though, and while it has plenty of fuel and spark to keep going, it needs better intercooling to go further. There is half a water injection setup already in the engine bay.

Overall, the car is a massive sleeper and given the standard ride height, standard hubcaps, stock looking exhaust, cooler behind the bumper etc, it has never had a 2nd glance from the police.

Thanks,

Justin.

d4bc_1-1.jpg

d754_1-1.jpg

18052009583.jpg

7b22_1.jpg

7863_1-1.jpg

d239_1.jpg

e23e_1.jpg

e7c4_1.jpg

hey mate impressive car

would you be interested in a swap for my Black r34 coupe, if you search my threads u will find it..

let me know via pm if u are

Update!

Finally got around to spraying the cooler matt black today, and I also put the standard mesh back in front of the cooler.

Now there is nothing that gives the car away!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...