Jump to content
SAU Community

Recommended Posts

I have owned this car for over 3.5 years and have done all the mods during that time, but its time to move onto something newer.

Item: R32 GTS-T Type-m, Gunmetal grey

Kilometers: 165XXX km's

Features:

*5 speed manual

*Factory sunroof

*Serviced every 5000kms with Shell helix ultra 5w-40

*Always garaged

Engine:

*Internally stock rb20det

*Gktech FMIC

*Hypergear TR43

*New Z32 afm (<5000km's)

*Gtr injectors + resistor pack

*X-force 3" dump/front pipe

*3" gutted cat

*3" Invidia cat back

*Std airbox with small cai

*Greddy type RS BOV (plumbed back)

*Adj. cam gears

*Walbro 255L fuel pump

*Dr Drift remap

*Gates racing timing belt replaced with cam gears

** Currently makes 215rwkw @ 16psi **

Suspension/Driveline:

*HSD HS adj. coilovers, F 8kg, R 6kg

*Front strut brace

*Kaaz 1 way mechanical LSD

*Tomei HICAS lock kit

*JJR alloy cradle bushes

Wheels/tyres:

DTM rush in gunmetal grey

-18 * 8.5 +29 with Federal 595SS (approx 60%)

-18 * 9.5 +35 with roadworthy tyres

Interior:

*JJR Drift steering wheel

*HKB boss kit

*Nismo leather gear knob

*RAZO turbo timer

*Boost gauge

*Pioneer CD player

*6" front speakers

*6x9 rear speakers

*Sony xplode 250w amp

*Immobiliser

Exterior:

*GTR bonnet

*GTR grille

*Nismo(?) boot lip spoiler

Bad points: The paint and body is a bit rough in places. The front left guard was replaced with a gts item, front bar needs some touching up. Bonnet has a small (<10c size) dint pushed out of it.

Rego: Feb 2010

Price: $12,750 with RWC / $12,250 without

I can remove wheels, coilovers or diff to lower the price

Interested in swaps for: Type x 180sx, s14a

Contact: PM or Aaron on 0438 651 739

Location: Ballarat, Victoria

More pics by request, I have probably left some mods off the list.

dsc01366copy.th.jpg dsc01367copy.th.jpgaarondynotorquecopy.th.jpg

Edited by Aaron32
Link to comment
https://www.sau.com.au/forums/topic/282839-1992-r32-gts-t-gunmetal-grey/
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @Haggerty you still haven't answered my question.  Many things you are saying do not make sense for someone who can tune, yet I would not expect someone who cannot tune to be playing with the things in the ECU that you are.  This process would be a lot quicker to figure out if we can remove user error from the equation. 
    • If as it's stalling, the fuel pressure rises, it's saying there's less vacuum in the intake manifold. This is pretty typical of an engine that is slowing down.   While typically is agree it sounds fuel related, it really sounds fuel/air mixture related. Since the whole system has been refurbished, including injectors, pump, etc, it's likely we've altered how well the system is delivering fuel. If someone before you has messed with the IACV because it needed fiddling with as the fuel system was dieing out, we need to readjust it back. Getting things back to factory spec everywhere, is what's going to help the entire system. So if it idles at 400rpm with no IACV, that needs raising. Getting factory air flow back to normal will help us get everything back in spec, and likely help chase down any other issues. Back on IACV, if the base idle (no IACV plugged in) is too far out, it's a lot harder for the ECU to control idle. The IACV duty cycle causes non linear variations in reality. When I've tuned the idle valves in the past, you need to keep it in a relatively narrow window on aftermarket ecus to stop them doing wild dances. It also means if your base idle is too low, the valve needs to open too much, and then the smallest % change ends up being a huge variation.
    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
×
×
  • Create New...