Jump to content
SAU Community

Recommended Posts

You mean the one on Williamsons Rd?

It's been opened for a while now. Everytime I drive past, I see the owner parked there with his Lamborghini. See a GT3 parked there quite often too.

I'm in the wrong business!

I live about 5 mins away from there so if anyone's heading down for a wash let me know!

You mean the one on Williamsons Rd?

It's been opened for a while now. Everytime I drive past, I see the owner parked there with his Lamborghini. See a GT3 parked there quite often too.

I'm in the wrong business!

I live about 5 mins away from there so if anyone's heading down for a wash let me know!

Is that the one next to the Apple Peal / big 3 lane round about?

Yep that's the one! :(

I see,

It's not too far for me either, might just drive by and check it out.

High pressure hose is best for a decent rinse.

So the owner has a Lamborghini ey...

Must look into buying a Car Wash business... :wave:

Theres going to be a multi million dollar car wash opening in september in my area, biggest one in australia. its f*kn huge. but probably will be pricey too

is that the one near the apple peel statue thing? i think we drove past it when we went cruising

is that the one near the apple peel statue thing? i think we drove past it when we went cruising

The one at the apple peel is called The Water Tunnel Carwash.

1 Fitzsimmons Lane, Templestowe.

http://www.acwa.net.au/vic.htm

The one at the apple peel is called The Water Tunnel Carwash.

1 Fitzsimmons Lane, Templestowe.

http://www.acwa.net.au/vic.htm

I went there the other night just for a quick high pressure hose on a hot night.

Was quite nice and fairly big to to fit a few cars.

I see,

It's not too far for me either, might just drive by and check it out.

High pressure hose is best for a decent rinse.

So the owner has a Lamborghini ey...

Must look into buying a Car Wash business... :P

My family knows the person who owns the carwash in north melbourne

massive block of land, always full

the owner got offered 3 mill for the land, turned it down cause he makes so much from the car wash business

My family knows the person who owns the carwash in north melbourne

massive block of land, always full

the owner got offered 3 mill for the land, turned it down cause he makes so much from the car wash business

Hell yeah you would make a lot and why sell... :P

Is that the Magic Hand Car Wash, 18-42 Racecourse Rd, North Melbourne..?

Hell yeah you would make a lot and why sell... :P

Is that the Magic Hand Car Wash, 18-42 Racecourse Rd, North Melbourne..?

yeah, they seem to do a pretty good job, im taking my car there tomorrow :P

yeah, they seem to do a pretty good job, im taking my car there tomorrow :P

Ah yeah, it is always packed on weekends and there is a Kebab caravan next to it LOL!

Then fill up on Mobil 8000 98 RON fuel, as it is next door and car will be sweet. :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...