Jump to content
SAU Community

Rb20det Silvertop Engine

Fluroman
 Share

Recommended Posts

Fluroman Enthusiast

Fluroman

Posted
Posted

I have an RB20det silvertop engine im planning on selling. Ive bought a 25 i will be putting in my 180sx in couple weeks. just thought id throw this up to see if anybosy is interested and if they are they can come for a test drive and check the engine out while its in the car running. I will gladly take $300 deposit if you are seriously interested after test drive. the car is hardly driven, but would like it to remain in the engine bay till my RB25det is ready to go in (which will be in 2 weeks) Engine is always run with the best oils and looked after by myself (im a mechanic by trade)

Rb20det silvertop 98,000kms

completely stock standard

done a compression test and psi is accross the board

the engine will come with everything except flywheel and ecu loom (however i will try get another flywheel in the meantime.

it does however come with the ECU.

The gearbox is in good cond, does not clunk or make any noises.

has an exedy HD clutch that is 3,800kms old.

( if you are seriously interested now is the time to come for a drive and see how good and clean this engine package is)

Price $1300, can help organise freight and will be ready for pickup on the 24th of this month

Im in Gladstone Queensland 4680 if you want to come look/drive.

pm me for more details or pm me and ill give you my number and have a chat. cheers

Link to comment
https://www.sau.com.au/forums/topic/283238-rb20det-silvertop-engine/
Share on other sites
  • 2 months later...
Angus_180 Rookie

Angus_180

Posted
Posted
I have an RB20det silvertop engine im planning on selling. Ive bought a 25 i will be putting in my 180sx in couple weeks. just thought id throw this up to see if anybosy is interested and if they are they can come for a test drive and check the engine out while its in the car running. I will gladly take $300 deposit if you are seriously interested after test drive. the car is hardly driven, but would like it to remain in the engine bay till my RB25det is ready to go in (which will be in 2 weeks) Engine is always run with the best oils and looked after by myself (im a mechanic by trade)

Rb20det silvertop 98,000kms

completely stock standard

done a compression test and psi is accross the board

the engine will come with everything except flywheel and ecu loom (however i will try get another flywheel in the meantime.

it does however come with the ECU.

The gearbox is in good cond, does not clunk or make any noises.

has an exedy HD clutch that is 3,800kms old.

( if you are seriously interested now is the time to come for a drive and see how good and clean this engine package is)

Price $1300, can help organise freight and will be ready for pickup on the 24th of this month

Im in Gladstone Queensland 4680 if you want to come look/drive.

pm me for more details or pm me and ill give you my number and have a chat. cheers

how much for long motor??? need it asap

craig R33 Grand Master

craig R33

Posted
Posted

hey man, very interested, can you please get me a quote for freight? i have to head out,

please get back to me on 0433073302 (sms)

have $ waiting

cheers, craig

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • JC71
      98 R34GTT 4k engine stumble

      By JC71 · Posted

      neither stumble or cut really seem to be an appropriate term....hard to explain its like a rev limiter but at 4k, but it violently shakes engine and entire vehicle as the rpms will not rise over 4k, even with slow acceleration. as soon as it hits 4k, it sounds like entire spark is lost entirely. plugs were 1.1 which I used as such, but later put in new plugs gapped down to .8 changed back after issue arose when I replaced the coils, still does it with either plug gap...damn and it was all running so good.
    • TurboTapin
      Why am I hitting a power wall with my stroked RB25?

      By TurboTapin · Posted

      Oh how times have changed! I actually lean it out relative to my water/methanol injector duty cycle. The methanol adds a lot of fueling and you can then lean it out even more due to reduced knock. 
    • Dose Pipe Sutututu
      Why am I hitting a power wall with my stroked RB25?

      By Dose Pipe Sutututu · Posted

      Yeah my thoughts are the same, a well thought out WMI setup, would be slightly ahead of just straight E85 and you're also chemically intercooling the charged air, dropping it even further. This is why you need to add so much more fuel as soon as you spray. I remember someone taking me through their set up before (Dennis, has a R33, lives around Cabramatta - no idea if he's still around on this forum). He would target AFR 10:1 on 98, then as WMI ramped on, AFR would lean back up to 11:1. Amazingly, he did this all through his PowerFC, a relay to cut power to his EBC solenoid if there was not enough line pressure on his WMI kit. And of course, if there wasn't any boost made above gate pressure, you wouldn't be accessing the load cells with heaps of timing for WMI. One downside to that rudimentary setup, once the WMI came on, the EBC would unleash the dragon, and of course all the timing. Tyres would fry lol.
    • MBS206
      RB25DET with solid lifters - which cams ?

      By MBS206 · Posted

      Shimmed or shimless, still solid, no hydraulic pump up stuff.
    • MBS206
      NC MX5

      By MBS206 · Posted

      They have said food will be limited. Mainly meat pies and sausage rolls from memory. But they have a coffee van!
×
×
  • Create New...