Jump to content
SAU Community

Recommended Posts

I'm not totaly happy with my oil presure so I'm thinking an upgrade to the oil pump may be the go and after a bit of searching I have come across NITTO,and N1 and I'm thinking there may be more.

The NITTO was around $1200/1300 and the Skyline GTR NI $580 appart from the $ how big is the difference between these two.

Will the GTR N1 fit the 98 R34 GT-T and will there be a significant improvement over the OE GTT one in there now ?

I'm not modding this car, I only push it around a little bit occasionaly, I'm not $1300 bucks worth unhappy with the current pressure and it wont see the track while I've got it.

Having said all that summer is coming so soon would be the time to do this if I'm going to so any advice on this would be gratefully received.

Oh and while I think about it how hard / many hours in fitting to a 98 R34 GT-t.

Link to comment
https://www.sau.com.au/forums/topic/283924-oil-pumps-aint-oil-pumps-sol/
Share on other sites

I don't know how R34's work, but incorrect oil pressures (32's, 33's) are the result of a dirty pressure switch, I would first clean the switch (near the oil filter). As for fitting a new pump, its a engine out job. Others have reported the Nitto pumps are as good, if not better than the $2000 jap pumps.

If it's not going to the track, or be bouncing off the limiter, there are better ways to spend your money than getting track orientated pumps for a lazy daily driver.

Read this thread: http://www.skylinesaustralia.com/forums/N1...il-t283867.html

I definately wouldn't worry about the oil pump. To replace it you will need to take motor out and pull it apart (it is possible on car but still heaps of labour, balancer off, timing belt off, drop subframe, sump off).

You can get a second hand rb25 for less than the cost of an oil pump....

:P Thanks guys didn't realise how much info was in the Epic fail thread thanks for that , oil pressure sender cleaning will be done.

Just a bit more I came across this:-

NISMO OIL FILTER

FEATURES:

  • 21% LESS PRESSURE LOSS
  • 24% INCREASE IN FILTRATION
  • 10% LESS FLOW RESISTANCE
  • 37% INCREASED LIFE

PRICE: $49.95 EACH

And just wondered if there's any mileage with these claims or is it just manufacturers rhetoric ? reason I asked I noticed an overall slight drop when I changed the oil and filter last time the filter that was in was a Jap no name which I think may have come in with the car.

I'm using 10x40 Nulon quick flow full syn and a Nissan OE filter.

Edited by BASHO

All I can say is FARK THAT! I could be wrong, but with the 'shithouse' Ryco filters, I have no strange variations or delays in oil pressure (that said im going to start using Nissan ones for peace of mind)

IMO if you're going to spend $50 on the filter, add that amount to what you spend on oil and use Motul 300v or something.

I think it's all a load of crap, when theyre $8 each, just change it when you change your oil.. May as well use a genuine Nissan filter, theyre pretty much the same price maybe cheaper than the Ryco equiv.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Wrong question. There's no point in spending the rather large sum of cash and effort to add turbo, without taking it to the "sensible" limit of the motor itself. If you have to upgrade injectors, etc, then so be it. That is a tiny fraction of what it will cost you to turbo it.
    • Measure voltage at the starter solenoid terminal when the key is at start and it has clicked. If it is really low, then the suspicion falls on the ignition switch (contacts or wiring thereof) as causing a voltage drop instead of sending enough volts to throw the solenoid all the way to engage the starter itself. If it is a decent voltage, then the suspicion is on the solenoid. Might have s horted coil, or might hva dirty contacts. Rip the starter off, dismantle, clean up contacts and inspect winding. It might not be possible to see if there is a short in the winding though. I have a spare starter here that I could measure the resistance of the coil, as a guide to about what it should be, if you need a comparison. <parts hoarder>No you cannot have it.</parts hoarder>
    • lights are on just the one click.  
    • Absolutely matters because, while a temperature change will eventually reach a sensor at the end of a static line, the response time is far far far too slow to be useful. Might as well not have a temp gauge at all.
    • When I was eyeing off the 370GT (after deciding I didn't want to spend 30-40k+ to relive my early 20s in an R33) I thought it'd be a good project to add a turbo to it. Now that I have a 370GT, and I've had a couple of chances to open it up, I'm pretty stunned by how much power it makes 🫠 Honestly, the way the VVEL opens it up, it almost feels like there's a little turbo tucked away in there somewhere. It's like Nissan looked at VTEC and said "hold my beer" 😁 Has anyone thrown a turbo into their 370Z or 370GT? Is there a conservative boost level you can run without having to upgrade the fuel system, or are bigger injectors and a bigger pump a given?
×
×
  • Create New...