Jump to content
SAU Community

Recommended Posts

Same old story here people

A few things have changed and i need some money for bigger ventures,ultimately id love to win lotto

but this is more realistic, so everything has to go!

RB26 HEAD,

ported n polished,

Grex 264 duration 9.15 lift cams

rear drain

has been tested and serviced

$2500

yet to be re-assembled,

set up for twin cam head

RB30 series 2 Block

crack tested

boared and hoaned

decked

New welsch plugs

CP pistons & rings 8.3 or 8.5:1

H Beam rods

ARP Rod bolts

ARP main bolts

new water pump

RB25 oil pump

Balanced,Grubscrewed,Collared crank

Race bearings

$5000

: Nismo rebuild gasket kit, with metal head gasket (no stem seals) $400

: Plenum $300

: throttle bodies & sandwich plate $200

: Ross RB26 harmonic balancer (new) $600

: Aeromotive fuel pressure regulator,braided lines,Trust twin entry fuel rail $600

: HKS oil pump (new) $2000

: TO4Z,Garret, custom surge slotted compressor housing, .81 rear (new) $2900

: Turbosmart 44mm wastegate,3 springs, (new) $700

: Sump, baffled, increased capacity, fittings for head and sump drain. (new) $400

: ARP Head studs (new) $350

: SARD 680cc injectors, $700

: Greddy Water pump and PS pump pulley $350

everything is new or as new condition

virtually everything needed to make a reliable 400rwkw

I would like to have a buyer for most parts before confirming a sale,

located in Tasmania, willing to post everything at buyers expense.

if someone is after a few parts we should be able to work something out.

basically im guaging interest. need everything gone, otherwise ill keep and install it.

pics on request

prices are as listed,i think they are reasonable.

if you have an offer or better idea of pricing PM me to discuss.

no negative comments please

contact via PM

cheers

Link to comment
https://www.sau.com.au/forums/topic/284776-rb26-head-rb30-block-garret-hks/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...