nigelswazi Posted September 1, 2009 Share Posted September 1, 2009 (edited) Well im sick of renting and I have seen a house I would like to purchase so it maybe time to strip my R33. Yes I have only just finished it and have spent an absolute fortune building it using the best parts available but if there is enough interest in the following parts I will strip it all down with most parts removable the day a buyer wants them. Location - Adelaide can post/courier at buyers expense Contact - PM or SMS 0404998591 ------------------------------------------------------------------------------------------------------------------------------------------------------ Apexi AX53B70 Turbine Kit - equivalent of HKS GT-RS but in some people opinion better as its more responsive and punchy on a RB25 they make a very responsive 250rwkw on 14psi and up to 322rwkw on a built 25 with 22psi. The turbo is a complete kit including braided lines, fittings, elbow etc. Price - $1650 Apexi Power FC complete with hand controller in excellent condition complete with purchase receipt. Currently has an excellent map for the stock turbo with FMIC, 3" exhaust etc. Price - $1400 PFC Datalogit interface complete with software, USB adaptor etc. This is the latest version that will work on any Power FC. Price - $475 Apexi Super Suction Metal Intake Pipe to suit RB in excellent condition complete with silicon joiners. Price - $225 Moonface MF-R Stainless Dump and Front Pipe to suit R32 R33 Stagea. Unique and extremely high flowing dump/front setup with excellent ground clearance due to design and distinctive engine note. Bought new and used for a few dyno runs on my just finished car still comes with the original Moonface gaskets and bolt kit + stickers. These are rare to find here in Oz and are $907 from Nengun at the moment http://www.nengun.com/moonface/exhaust-chamber-pro Price - $550 Sard Torque Control Valve - replaces your cat and gives excellent improvements in down low torque and also seems to decrease lag. Similar to the down low torquey feeling when you put a silencer in your cannon but with a silencer you have no power up top. With the SARD valve you have heaps of power all the way through the rev range. Price - $300 Z32 AFM complete with plug in excellent condition was bought new and barely used since - Price - $250 ATS Carbonetics 2 Way LSD 4.3 Ratio in S14/R33/R34 five bolt half shaft housing. The diff is in excellent condition and has barely seen much use since purchase with fresh oil. These diff centres are one of the best money can buy perfectly streetable with excellent traction. Price - $1000 Tomei HICAS Lock Kit to suit HICAS vehicles. The kit is used but still in good condition and easy to install. Price - $120 Full R33 GTR Interior in excellent condition including front and rear seats + front and rear door trims/cards. Price - $1400 R33 GTS-T Whiteline Handling kit including valved Bilstein Shocks, Whiteline Springs, Adjustable Front and Rear Swaybars, Castor Rods with Castor Adjustable Bushes. Price - $1500 R33 GTS-T Ohlins Rear Damper Adjustable Shocks and Springs. These shocks feature massive inverse monotube inserts. Price - $450 Pair R33 GTS-T Series 2 UAS Carbon Fibre Vented Bonnet complete with Sparco Racing bonnet pins. Price - $600 R33 Custom Catch Can setup mounts on the drivers side strut toward and sits between plenum and fuse box. Features speedflow fittings, speedflow lines and a K&N Filter. Easy to fit comes with speedflow fittings for your rocker covers to replace the stock fittings. Installation takes 5 mins looks awesome and cost over $300 to have custom made. Price - $200 Genuine Rear Strut Brace to suit R33 in excellent condition. Price - $150 Brand New DBA 4000 Slotted Rear Rotors model 4908SL/R to suit R33 GTS-t, R34 GT-T, R32 GTR + others. Price - $280 Front R34 GT-T Slotted Front Rotors used very low kms but in excellent condition and freshly machined.Price - $200 R33 Genuine Ganador Mirrors painted black ready to fit, you can paint any colour to suit your car - $450 Cusco Front Camber Adjustable Upper Arms suit R33 R34 Stagea barely used in excellent condition. Price - $425 Cusco Rear Camber Adjustable Upper Arms suit R33 S14 in excellent condition - Price - $280 Nardi Steering wheel in excellent condition complete with boss kit to suit R33 - Price $200 Greddy Oil Cooler kit to suit R33 GTS-t would suit most RB's with just modifying core mounting brackets. The kit is new and has only been trial fitted will comes with original box, instructions etc etc. Price - $600 HKS EIDS Idle Stabilizer unit brand new in box perfect for stopping that stalling when you come off the loud pedal hard or smoothing out your idle - Price $100 GFB Stealth FX BOV kit complete with trumpet and normal BOV adaptors. Currently has the universal adaptor fitted also have a S15 adaptor kit I can supply with it for free Price - $300 R33 Series 2 Front Bar in black complete with the rare Nismo Lower Lip. Price - $400 R34 GT-T Stockies complete with new 225/45/17 rubber and all centre caps. Price - $500 Brand New Bodyform 400R Rear Bar and Side Skirts these people make the best fitting and highest quality kits hand made in Australia. Cost $950 + postage with receipt of purchase. Price - $800 Brand New R33 PSI Parts Du-Luck Rear Bar and Side Skirts cost $846 with receipt of purchase. Price - $400 ------------------------------------------------------------------------------------------------------------------------------------------------------ Location - Adelaide can post/courier at buyers expense Contact - PM or SMS 0404998591 Edited September 1, 2009 by nigelswazi Link to comment https://www.sau.com.au/forums/topic/285999-eoi-apexi-ax53b70-kit-moonface-mf-r-dump-sard-torque-control-valve-z32-ats-carbonetic-2-way-lsd-full-r33-gtr-interior-bilsteins-tomei-pfc/ Share on other sites More sharing options...
nigelswazi Posted September 1, 2009 Author Share Posted September 1, 2009 HKS EIDS Electonic Idle Stabilizer SOLD PENDING PAYMENT Link to comment https://www.sau.com.au/forums/topic/285999-eoi-apexi-ax53b70-kit-moonface-mf-r-dump-sard-torque-control-valve-z32-ats-carbonetic-2-way-lsd-full-r33-gtr-interior-bilsteins-tomei-pfc/#findComment-4800496 Share on other sites More sharing options...
putraged Posted September 1, 2009 Share Posted September 1, 2009 keen if u able to split front + rear swaybars. cheers. Link to comment https://www.sau.com.au/forums/topic/285999-eoi-apexi-ax53b70-kit-moonface-mf-r-dump-sard-torque-control-valve-z32-ats-carbonetic-2-way-lsd-full-r33-gtr-interior-bilsteins-tomei-pfc/#findComment-4800627 Share on other sites More sharing options...
nigelswazi Posted September 1, 2009 Author Share Posted September 1, 2009 (edited) keen if u able to split front + rear swaybars.cheers. Prefer to sell handling kit as a kit at this stage as its all designed to work together but if I were to seperate the swaybars would be sold as a pair only. As asked in PM's the Apexi Kit is a low mount kit to which you can still fit the stock heat shield for stealth mounting. The turbo also features an adjustable actuator. Edited September 1, 2009 by nigelswazi Link to comment https://www.sau.com.au/forums/topic/285999-eoi-apexi-ax53b70-kit-moonface-mf-r-dump-sard-torque-control-valve-z32-ats-carbonetic-2-way-lsd-full-r33-gtr-interior-bilsteins-tomei-pfc/#findComment-4800652 Share on other sites More sharing options...
Yeedogga Posted September 1, 2009 Share Posted September 1, 2009 (edited) Hey mate, would you consider selling the 4 Bilstein shocks separately? What sort of $ would you take? Also interested in the HICAS lock kit- does it include the module to intercept the HICAS computer? Cheers Edited September 1, 2009 by Yeedogga Link to comment https://www.sau.com.au/forums/topic/285999-eoi-apexi-ax53b70-kit-moonface-mf-r-dump-sard-torque-control-valve-z32-ats-carbonetic-2-way-lsd-full-r33-gtr-interior-bilsteins-tomei-pfc/#findComment-4800961 Share on other sites More sharing options...
BASHO Posted September 1, 2009 Share Posted September 1, 2009 (edited) What color is the stealth BOV and will the OLINS rears fit an R34GT-t ? and what spring rate ? Edited September 1, 2009 by BASHO Link to comment https://www.sau.com.au/forums/topic/285999-eoi-apexi-ax53b70-kit-moonface-mf-r-dump-sard-torque-control-valve-z32-ats-carbonetic-2-way-lsd-full-r33-gtr-interior-bilsteins-tomei-pfc/#findComment-4801090 Share on other sites More sharing options...
ali-turko Posted September 1, 2009 Share Posted September 1, 2009 pics of catch plz mate Link to comment https://www.sau.com.au/forums/topic/285999-eoi-apexi-ax53b70-kit-moonface-mf-r-dump-sard-torque-control-valve-z32-ats-carbonetic-2-way-lsd-full-r33-gtr-interior-bilsteins-tomei-pfc/#findComment-4801217 Share on other sites More sharing options...
26ame Posted September 1, 2009 Share Posted September 1, 2009 not sure if they will fit... but will the rear seats fit in the back of a s14a ?? regards Dean Link to comment https://www.sau.com.au/forums/topic/285999-eoi-apexi-ax53b70-kit-moonface-mf-r-dump-sard-torque-control-valve-z32-ats-carbonetic-2-way-lsd-full-r33-gtr-interior-bilsteins-tomei-pfc/#findComment-4801392 Share on other sites More sharing options...
AdrianA Posted September 1, 2009 Share Posted September 1, 2009 whats your absolute best price on the turbo??? Link to comment https://www.sau.com.au/forums/topic/285999-eoi-apexi-ax53b70-kit-moonface-mf-r-dump-sard-torque-control-valve-z32-ats-carbonetic-2-way-lsd-full-r33-gtr-interior-bilsteins-tomei-pfc/#findComment-4801593 Share on other sites More sharing options...
nigelswazi Posted September 1, 2009 Author Share Posted September 1, 2009 (edited) Hey mate, would you consider selling the 4 Bilstein shocks separately? What sort of $ would you take?Also interested in the HICAS lock kit- does it include the module to intercept the HICAS computer? Cheers Not really wanting to seperate the kit to be honest already had people interested in the whole lot The HICAS Lock Kit includes the special shims and the module to intercept the HICAS computer What color is the stealth BOV and will the OLINS rears fit an R34GT-t ? and what spring rate ? The Stealth BOV has a silver body. The Ohlins will only fit S14/S15 and R33 GTS-t the R34 has a saddle type fitment at the bottom. pics of catch plz mate Will take some tomorrow of it fitted before I remove it whats your absolute best price on the turbo??? Plenty of PM's regarding the turbo so the price I SMS'd you yesterday would be the best price champ Edited September 1, 2009 by nigelswazi Link to comment https://www.sau.com.au/forums/topic/285999-eoi-apexi-ax53b70-kit-moonface-mf-r-dump-sard-torque-control-valve-z32-ats-carbonetic-2-way-lsd-full-r33-gtr-interior-bilsteins-tomei-pfc/#findComment-4801646 Share on other sites More sharing options...
nigelswazi Posted September 1, 2009 Author Share Posted September 1, 2009 The following are now sold pending payment Z32 AFM Apexi Intake Pipe Kit Link to comment https://www.sau.com.au/forums/topic/285999-eoi-apexi-ax53b70-kit-moonface-mf-r-dump-sard-torque-control-valve-z32-ats-carbonetic-2-way-lsd-full-r33-gtr-interior-bilsteins-tomei-pfc/#findComment-4801883 Share on other sites More sharing options...
putraged Posted September 1, 2009 Share Posted September 1, 2009 hi mate just in case u change ur mind, i'll take ur front and rear swaybar since @yeedogga also interested in the suspension set. maybe we can work something. cheers. Link to comment https://www.sau.com.au/forums/topic/285999-eoi-apexi-ax53b70-kit-moonface-mf-r-dump-sard-torque-control-valve-z32-ats-carbonetic-2-way-lsd-full-r33-gtr-interior-bilsteins-tomei-pfc/#findComment-4802354 Share on other sites More sharing options...
nigelswazi Posted September 1, 2009 Author Share Posted September 1, 2009 hi matejust in case u change ur mind, i'll take ur front and rear swaybar since @yeedogga also interested in the suspension set. maybe we can work something. cheers. Not really that keen to seperate due to the extra hassle of three lots of payment and posting but if I was to seperate would seperate as follows: $1100 Bilsteins + Shocks $375 Swaybars $125 Adj Castor Rods Link to comment https://www.sau.com.au/forums/topic/285999-eoi-apexi-ax53b70-kit-moonface-mf-r-dump-sard-torque-control-valve-z32-ats-carbonetic-2-way-lsd-full-r33-gtr-interior-bilsteins-tomei-pfc/#findComment-4802392 Share on other sites More sharing options...
nigelswazi Posted September 2, 2009 Author Share Posted September 2, 2009 Whiteline Handling Kit + Power FC Sold Pending Payment tonight Link to comment https://www.sau.com.au/forums/topic/285999-eoi-apexi-ax53b70-kit-moonface-mf-r-dump-sard-torque-control-valve-z32-ats-carbonetic-2-way-lsd-full-r33-gtr-interior-bilsteins-tomei-pfc/#findComment-4802971 Share on other sites More sharing options...
GUN_METAL_GTR32 Posted September 2, 2009 Share Posted September 2, 2009 what housing is the apexi turbo it should have a few more letter like p20 or p25 etc at the end. i had the p20 on my s14 and it made 260kw but if u have the bigger housing i wouldnt mine it for my 34 could u please find out for me dude cheers julz Link to comment https://www.sau.com.au/forums/topic/285999-eoi-apexi-ax53b70-kit-moonface-mf-r-dump-sard-torque-control-valve-z32-ats-carbonetic-2-way-lsd-full-r33-gtr-interior-bilsteins-tomei-pfc/#findComment-4803770 Share on other sites More sharing options...
nigelswazi Posted September 2, 2009 Author Share Posted September 2, 2009 what housing is the apexi turbo it should have a few more letter like p20 or p25 etc at the end.i had the p20 on my s14 and it made 260kw but if u have the bigger housing i wouldnt mine it for my 34 could u please find out for me dude cheers julz Hi Julz, This has the P25 housing and on the box it specifies its made for a RB25 so perfectly matched to all RB25 setups Link to comment https://www.sau.com.au/forums/topic/285999-eoi-apexi-ax53b70-kit-moonface-mf-r-dump-sard-torque-control-valve-z32-ats-carbonetic-2-way-lsd-full-r33-gtr-interior-bilsteins-tomei-pfc/#findComment-4804027 Share on other sites More sharing options...
nigelswazi Posted September 2, 2009 Author Share Posted September 2, 2009 The Whiteline Handling Kit and Apexi Power FC have now been sold Link to comment https://www.sau.com.au/forums/topic/285999-eoi-apexi-ax53b70-kit-moonface-mf-r-dump-sard-torque-control-valve-z32-ats-carbonetic-2-way-lsd-full-r33-gtr-interior-bilsteins-tomei-pfc/#findComment-4804316 Share on other sites More sharing options...
08r3308 Posted September 2, 2009 Share Posted September 2, 2009 i sent you pm Link to comment https://www.sau.com.au/forums/topic/285999-eoi-apexi-ax53b70-kit-moonface-mf-r-dump-sard-torque-control-valve-z32-ats-carbonetic-2-way-lsd-full-r33-gtr-interior-bilsteins-tomei-pfc/#findComment-4804326 Share on other sites More sharing options...
nigelswazi Posted September 3, 2009 Author Share Posted September 3, 2009 (edited) i sent you pm PM Replied sorry about delay have been swamped with PM's and busy removing parts for buyers ---------------------------------------------------------------------------------------------------- The Apexi Turbo Kit is SOLD PENDING PAYMENT ATS Carbonetic 2 Way LSD SOLD PENDING PAYMENT The HKS EIDS, Z32 AFM and the Apexi Suction Kit are now confirmed sold and on their way to their respective new owners Edited September 3, 2009 by nigelswazi Link to comment https://www.sau.com.au/forums/topic/285999-eoi-apexi-ax53b70-kit-moonface-mf-r-dump-sard-torque-control-valve-z32-ats-carbonetic-2-way-lsd-full-r33-gtr-interior-bilsteins-tomei-pfc/#findComment-4806283 Share on other sites More sharing options...
nigelswazi Posted September 3, 2009 Author Share Posted September 3, 2009 (edited) Just to update the following is still for sale ------------------------------------------------------------------------------------------ PFC Datalogit interface complete with software, USB adaptor etc. This is the latest version that will work on any Power FC. Price - $475 Moonface MF-R Stainless Dump and Front Pipe to suit R32 R33 Stagea. Unique and extremely high flowing dump/front setup with excellent ground clearance due to design and distinctive engine note. Bought new and used for a few dyno runs on my just finished car still comes with the original Moonface gaskets and bolt kit + stickers. These are rare to find here in Oz and are $907 from Nengun at the moment http://www.nengun.com/moonface/exhaust-chamber-pro Price - $550 Sard Torque Control Valve - replaces your cat and gives excellent improvements in down low torque and also seems to decrease lag. Similar to the down low torquey feeling when you put a silencer in your cannon but with a silencer you have no power up top. With the SARD valve you have heaps of power all the way through the rev range. Price - $300 ATS Carbonetics 2 Way LSD 4.3 Ratio in S14/R33/R34 five bolt half shaft housing. The diff is in excellent condition and has barely seen much use since purchase with fresh oil. These diff centres are one of the best money can buy perfectly streetable with excellent traction. Price - $1000 Tomei HICAS Lock Kit to suit HICAS vehicles. The kit is used but still in good condition and easy to install. Price - $120 Full R33 GTR Interior in excellent condition including front and rear seats + front and rear door trims/cards. Price - $1400 R33 UAS Carbon Fibre Vented Bonnet complete with Sparco Racing bonnet pins. Price - $600 Genuine Rear Strut Brace to suit R33 in excellent condition. Price - $150 Brand New DBA 4000 Slotted Rear Rotors model 4908SL/R to suit R33 GTS-t, R34 GT-T, R32 GTR + others. Price - $280 Front R34 GT-T Slotted Rotors used very low kms but in excellent condition and freshly machined.Price - $200 R33 Genuine Ganador Mirrors painted black ready to fit, can be painted any colour to suit your car - $450 Cusco Front Camber Adjustable Upper Arms suit R33 R34 Stagea barely used in excellent condition. Price - $425 Cusco Rear Camber Adjustable Upper Arms suit R33 S14 in excellent condition - Price - $280 Nardi Steering wheel in excellent condition complete with boss kit to suit R33 - Price $200 Greddy Oil Cooler kit to suit R33 GTS-t would suit most RB's with just modifying core mounting brackets. The kit is new and has only been trial fitted will comes with original box, instructions etc etc. Price - $600 GFB Stealth FX BOV kit complete with trumpet and normal BOV adaptors. Currently has the universal adaptor fitted also have a S15 adaptor kit I can supply with it for free Price - $300 R33 Series 2 Front Bar in black complete with the rare Nismo Lower Lip. Price - $400 Edited September 3, 2009 by nigelswazi Link to comment https://www.sau.com.au/forums/topic/285999-eoi-apexi-ax53b70-kit-moonface-mf-r-dump-sard-torque-control-valve-z32-ats-carbonetic-2-way-lsd-full-r33-gtr-interior-bilsteins-tomei-pfc/#findComment-4806295 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now