Jump to content
SAU Community

Arc/tabata Radiator, Induction Box And Intercooler To Cool Down Your Skylines !


Recommended Posts

Hey guys,

we have these in stock.

ARC best brand when it comes to cooling your skylines. Quality and straight bolt on.

Apexi Radiator typeS

GTR32

$600

ApexiRad.jpg

ARC 2Layer Radiator

For BNR32

$850

ARCBNR32.jpg

ARC Induction Box HCR32

$400

ARCHCR32.jpg

ARC Super Induction Box for ECR33

$440

ARCECR33A.jpg

ARCECR33.jpg

ARC TurnFlow Cooler Kit ER34

Brand New

$1550

ARCR34.jpg

Trust Sidemount cooler for ECR33

$400

ECR33Trust.jpg

ARC Induction Box BCNR33

near new condition

$450

ARCBCNR33.jpg

Tabata 36mm Al Radiator for late model BNR34

$880

TabataR34.jpg

For more info on these ARC gear or anything parts you see on my website please feel free to pm or call me on 0422 422 344.

Cheers,

Thuy

hay thuy

do u reckon that the r33 arc box will fit an r34 gtt

cheers

julz

love to say yes mate but I don't think so...

  • 2 weeks later...
  • 2 weeks later...
  • 3 weeks later...


  • Similar Content

  • Latest Posts

    • Or, the height of the release bearing is not correct for your combo. Start with the bleeding and checking the slave moves throughout its range when you press the pedal (2 person required), but it is possible for the height to be internally wrong too (box back off to measure.
    • Yes, there's quite a few things that can go wrong during a clutch install. Very unlikely. I have a similar clutch. They (ACS) make good gear. No, it is not normal. It is possible that you just need to bleed the clutch slave. But the new clutch will also have a more aggressive actuation force/pressure, and so your old slave cylinder might be a bit leaky or otherwise compromised, and not up to the extra force required. Or the master cylinder, same.
    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
×
×
  • Create New...