Jump to content
SAU Community

Recommended Posts

Link

Good job nobody was seriously hurt or killed.

Driver interviewed after tunnel crash

Article from: PerthNow Jon Bassett

September 05, 2009 09:00am

FOUR people were injured after being hit by a utility as they walked through the Northbridge Tunnel in East Perth early today.

Police said the four were the driver and three passengers in a Nissan Skyline that had hit the wall of the eastbound lane.

They had left the car and were walking out of the tunnel when they were hit by a white Holden Commodore utility.

The incident happened about 4.30am.

Police said none of the four was seriously hurt.

One was found in bushes near the tunnel exit with back injuries, another had a broken ankle.

A man, believed to be the driver of the utility that stopped on the Graham farmer Freeway, was being interviewed by police.

Edited by Battery_backup
Link to comment
https://www.sau.com.au/forums/topic/286684-skyline-crashed-in-the-tunnel/
Share on other sites

How did the commodore ute manage to clean them up? they would have been walking in the emergency lane surely.

And how do you hit the wall in the tunnell? They were either doing some sort of speed, somebody forced them off the road (not necesarily on purpose but a blind lane change), or somebody left something on the road (fallen off/out of a car). Either way something is wrong!

How did the commodore ute manage to clean them up? they would have been walking in the emergency lane surely.

And how do you hit the wall in the tunnell? They were either doing some sort of speed, somebody forced them off the road (not necesarily on purpose but a blind lane change), or somebody left something on the road (fallen off/out of a car). Either way something is wrong!

Maybe they walked out in the direction of the traffic? Would have been dumb, dumb, dumb though.

Roads were quite slippery this morning...maybe that was one factor in the initial crash? Still the tunnel is supposed to be dry inside right?

tunnel = wet this morning

friends in car = would show off

drop a gear and plant it to hear the sound of zorst in tunnel, wheel spin, wall grinding.

never know..could be?

Edited by viet_boi

i went thru the tunnel one day and a lady was standing out here car that had broken down. the lights on the roof where flashing ambar and a PA system was telling her to get back into her car. it was really loud and i could easily hear it in my car. i don't think your alound to walk or ride a bike through the tunnel, someone correct me if i'm wrong.

first post "walking out of the tunnel when they were hit by a white Holden Commodore utility"

second post "I wonder if this was that burgundy 4 door 33. haha"

i always laugh when people get run over too , im like the first one standing over them pointing like nyahh nyaaaahh looooserrrr hahah

  • 3 weeks later...

Funny how people ... namely most of you ... make comments that have no foundation in fact. You read some news article that is at best void of any fact or detail such as how the initial accident occurred and you lot of brainstrusts jump to the conclusion that the driver was some moron hoon speeding and driving with reckless abandon. I know the driver of the Skyline and besides being a top bloke he's a damn good driver who has gone through advanced driver training and has experience in rally driving ... he no doubt has better skills than most of you lot combined. Grow up people, accidents happen even to the best of drivers. The police are not looking to charge the Skyline driver with ANYTHING but the guy in the ute is facing a number of serious charges which could result in a prison sentence. BTW don't believe everything you read in the press because there was only one passenger in the Skyline not 3. One more thing when you moan about some Skyline hoons giving everyone else a bad name you moan about the fact you're all the victims of stereotyping ... how is it any different if you come to a conclusion based on little or no facts that the driver in this case was a hoon or lacked the skill to drive that car? Like I said before, grow up and have the sense to make a comment based on FACTS, or don't make a comment at all. :thumbsup:

Funny how people ... namely most of you ... make comments that have no foundation in fact. You read some news article that is at best void of any fact or detail such as how the initial accident occurred and you lot of brainstrusts jump to the conclusion that the driver was some moron hoon speeding and driving with reckless abandon. I know the driver of the Skyline and besides being a top bloke he's a damn good driver who has gone through advanced driver training and has experience in rally driving ... he no doubt has better skills than most of you lot combined. Grow up people, accidents happen even to the best of drivers. The police are not looking to charge the Skyline driver with ANYTHING but the guy in the ute is facing a number of serious charges which could result in a prison sentence. BTW don't believe everything you read in the press because there was only one passenger in the Skyline not 3. One more thing when you moan about some Skyline hoons giving everyone else a bad name you moan about the fact you're all the victims of stereotyping ... how is it any different if you come to a conclusion based on little or no facts that the driver in this case was a hoon or lacked the skill to drive that car? Like I said before, grow up and have the sense to make a comment based on FACTS, or don't make a comment at all. :thumbsup:

That is fair enough but I think we'd be interested in how he crashed in the tunnel...call it a lesson learned?

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • You don’t need to use full throttle all the time to break these blocks, 500kw at the wheels in more then enough to break them even with an occasional squirt. Hell I’ve seen them break under 400kw
    • A work around is to install the R35 card style AFM/MAF on the cold side of the intercooler piping and the BOV on the hot side piping. Works well, also you can combat the revs dropping by adding a bit more ignition timing on the idle ignition timing table to slow the rate of RPM drop.
    • Understood. If you dont have a ridiculous limit,  Tune, T's and P's are in check, and arent bashing it all the time and doing the due deligence for maintenance(inc oil analysis) then its pretty safe. 100% agree, let your right food control it to some extent.
    • So these external kits with the machined block for remote solenoid mount will only work on a NEO head and RB30 or RB26 bottom end   For an R33 head on a 26 bottom end the remote vct kit is to resolve RB26 manifold adaptor plates etc  IF you try to use the remote VCT on an RB30 or RB26 bottom end with an R33 head then  you can starve the cam journal??? I have one of these kits from bits I had years ago before plans changed  I don't understand how that tracks with this video   https://youtu.be/RuPiI22Mplk?feature=shared   This looks like I can run the v termite vct kit to feed the VCT on an R33 head on an RB26 bottom end?!?!?   Lol.... don't v have these problems on RB20s
    • Yeah i know that MAF is no no for this type of BoV. The engine has no BoV and "hose/pipes" ..it was all deleted (or probably it was not even on the engine when it was bought  ) It does that "sutututu" noise which i kinda do not want(atmospheric is better IMO...but standalone ECU)  What are the cons of running without blow off on stock RB25DET NEO. It running 5-7 PSI max (it has boost controller)   EDIT: and can Nistune be "tuned" to know there is no BoV to i dont know "know" and be better for a car? I read so many info about no BoV. One guy saying it is bad and hurting the turbo/engine/car and other that it does not...  
×
×
  • Create New...