Jump to content
SAU Community

Intercooler Er34 Gtt

myRB25DETT

By myRB25DETT,
in Victoria

 Share

Recommended Posts

myRB25DETT Community Regular

myRB25DETT

Posted
  • Author
Posted
ok fair enough. i hope it all goes well for you and you get it done with no dramas, and make sure to post up a dyno sheet at the end. :P

cheers scotty, have my alarm on early in the morning to shop around tomz....hope i will find one within 2 days..fingerscross everything runs smoothly...

i will post the result, hopefully friday..

cheers mate..

tavstar34 Community Regular

tavstar34

Posted
Posted
i got the cooling pro stealth intercooler for my r34, and got the guys at EAS performance to fit it. and all they had to cut was some plastic on the front bar. my reo bar hasn't been touched.

Hey mate. how much did they charge ya if u dont mind me asking.

175rwkw?? wat mods?

myRB25DETT Community Regular

myRB25DETT

Posted
  • Author
Posted (edited)
just get an r32 actuater and keep it at 10psi safer + legal :yes:

175rwkw what mods have you got atm ?

im already running 10PSI as my high boost with Greedy profec II...

mods atm are:

-full 3" exhaust all the way to turbo back with high-flow conv. 3"

-pod filter

-and just boosted to 10 PSI

-with the result of 175 rwkw (could have been 180rwkw or more if i had BP fuel in my tank at the time of the dyno, i used the really cheapest fuel back then which i got told to stop using them and used premium BP fuel for more power increase and engine safe in the future, i was nob back few months ago..lolz)i got mine dynoed at Chasers footscray..

soon to be fitted:

-cooler stealth from JJR

-walbro fuel pump

if have the cash:

-ECU remapped or PFC

-fuel injector

and that would be it for the meantime...

Edited by myRB25DETT
myRB25DETT Community Regular

myRB25DETT

Posted
  • Author
Posted
10-12 psi, you'll be right although there are the odd cases where you'll find your turbine getting friendly with your catalytic converter. I ran mine for many years around that boost and it was fine :yes:

adzmax, hope it wont be too soon with my one tho.....really hoping it will last for a few months atleast..lolz..as i said i dont trash my baby too often..so fingascross..

myRB25DETT Community Regular

myRB25DETT

Posted
  • Author
Posted

ok, results from my shopping, i ended up buying the cooling pro stealth from JJR and walbro fuel pump thru Dr.Drift...pick it up yesterday and now just waiting to fit everything in next week or so....

cant wait the result for this mods..how much do u reckon guys will add this mod to my power??cooler, fuel pump and boost to 12 PSI?? im already running 175rwkw or more with better fuel..

and heres some pix i took today:

post-59132-1252629636_thumb.jpg

post-59132-1252629653_thumb.jpg

post-59132-1252629670_thumb.jpg

post-59132-1252629684_thumb.jpg

post-59132-1252629699_thumb.jpg

is there anything else missing in my cooler package guys? or thats about it?? its my first cooler so have no idea what comes with it really...

cheers

scotty014 Veteran

scotty014

Posted
Posted

it looks like everything to me. just a note with that intercooler the top bracket doesnt line up so you will have to make a little extra bracket to hook it up to. ill post up a pic of mine if you like.

myRB25DETT Community Regular

myRB25DETT

Posted
  • Author
Posted
it looks like everything to me. just a note with that intercooler the top bracket doesnt line up so you will have to make a little extra bracket to hook it up to. ill post up a pic of mine if you like.

yes please scotty...just wanted to know what it looks like when its done...cheers mate :yes:

scotty014 Veteran

scotty014

Posted
Posted

the first pic if you look closely you can see the modified bracket. and in the second pic is how snug the intercooler sits on the reo bar ( im pretty sure its the reo bar its the only metal part on the front lol). ill get a front on pic later tonight and you will see how the low the pipe underneath hangs. im pretty sure i could get it higher if i moved the bracket up a bit more. ill have to look into that.

post-41669-1252631979_thumb.jpg

post-41669-1252632083_thumb.jpg

myRB25DETT Community Regular

myRB25DETT

Posted
  • Author
Posted
the first pic if you look closely you can see the modified bracket. and in the second pic is how snug the intercooler sits on the reo bar ( im pretty sure its the reo bar its the only metal part on the front lol). ill get a front on pic later tonight and you will see how the low the pipe underneath hangs. im pretty sure i could get it higher if i moved the bracket up a bit more. ill have to look into that.

post-41669-1252631979_thumb.jpg

post-41669-1252632083_thumb.jpg

cheers for that scotty.....see how i go with my one next week... :yes:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By GTSBoy · Posted

      I've never played with one, but I would expect that you are correct. That slot looks like it is intended to be used to unscrew the end, and the flats on the body would be better than grabbing it around the round bit with a pipe wrench. So, yeah, probably unscrews. You'll probably have to make a tool to drive in that slot.
    • WMDC35
      Wheel Sizes & Offsets For Skylines

      By WMDC35 · Posted

      A bit late but A disk S13P fit over stock R32 GTR brakes, usually A disk front, O disk rear works.
    • Duncan
      RB20DE NEO smallbox clutch.

      By Duncan · Posted

      Or, the height of the release bearing is not correct for your combo. Start with the bleeding and checking the slave moves throughout its range when you press the pedal (2 person required), but it is possible for the height to be internally wrong too (box back off to measure.
    • GTSBoy
      RB20DE NEO smallbox clutch.

      By GTSBoy · Posted

      Yes, there's quite a few things that can go wrong during a clutch install. Very unlikely. I have a similar clutch. They (ACS) make good gear. No, it is not normal. It is possible that you just need to bleed the clutch slave. But the new clutch will also have a more aggressive actuation force/pressure, and so your old slave cylinder might be a bit leaky or otherwise compromised, and not up to the extra force required. Or the master cylinder, same.
    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
×
×
  • Create New...