Jump to content
SAU Community

R30's Represent At Canberra's Jdmfest 09

Factory 5

By Factory 5,
in Classic & Vintage (1950's-1980's)

 Share

Recommended Posts

Factory 5 Mentor

Factory 5

Posted
Posted

IMG_7150.jpg

i got heaps of pics, but limited time to upload

Just a bit of a brag....

There was a promotional event in Canberra on the weekend, run by Ultimate Tunes. Sausages, show & shine, and $30 dyno runs

My all stock MR30 L24e... scored a mighty 52kW at the rear bags!

A fellow Canberran got over 165kW on a Fj20et, all he was running was a custom exhaust and bigger boost

IMG_6868.jpg

IMG_7190.jpg

Thanks to Mark Eldridge Photography

Factory 5 Mentor

Factory 5

Posted
  • Author
Posted
52kw at the wheels! that's probably what id expect from mine haha.

man you gotta get that turbo gear on ASAP!

its allmost together... JUST NEED THOSE FRIGGEN INJECTORS!!!!!!

call up my dumbass brother and get him to post them.... including the intake manifold!!!

garrrr.... sif i'd boost it with stock injectors!

Ravenoak Community Regular

Ravenoak

Posted
Posted
its allmost together... JUST NEED THOSE FRIGGEN INJECTORS!!!!!!

call up my dumbass brother and get him to post them.... including the intake manifold!!!

garrrr.... sif i'd boost it with stock injectors!

Are you still selling the R30 or are you going keep it. Depending on the price I may know someone who would take it off yuor hands.

cheers

Factory 5 Mentor

Factory 5

Posted
  • Author
Posted

Well Silent SHadow had a set of VL turbo hose tail around the 270cc mark, my brother has picked them up, but he takes A LONG TIME to send them down, like i wouldnt expect to see them in a month

I do have a set of RB25de 270cc, but they are o-ring, so i will see how well i can force some fuel hose over the ends and double clamp it.

Does anyone know what impedance the RB25de injectos are? and what the L20et ones are?im confusiosed

Ghostrider Grand Master

Ghostrider

Posted
Posted
Well Silent SHadow had a set of VL turbo hose tail around the 270cc mark, my brother has picked them up, but he takes A LONG TIME to send them down, like i wouldnt expect to see them in a month

I do have a set of RB25de 270cc, but they are o-ring, so i will see how well i can force some fuel hose over the ends and double clamp it.

Does anyone know what impedance the RB25de injectos are? and what the L20et ones are?im confusiosed

RB30E & ET injectors are low imp 250cc and I'm sure you were told when you got them, the RB25DE are 270cc low imp.

Eazy enough to check though, just put a multi meter accross the terminals.

I might just have a few FJ20et injectors up for grabs shortly & they are 370cc low imp hose tail fitment.

I think Disco wants a set of 4, so that will leave 8 over as spares.

Cheers, D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Duncan
      Valve clearance for RB25det series 2

      By Duncan · Posted

      Its also worth mentioning that 30 years after it left the factory and god knows how many missed oil changes since, there is every possibility that one or more lifters are ticking because they are sticky/gummed up. To resolve that you need to pull the cams then pull each lifter, disassemble, clean, reassemble, soak in oil and re-install, and they should come up good as new.
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      What air filter are you running? Is it a panel filter in the stock air box, or a pod filter? Is the air filter the type that is oiled?   If you unplug the IACV, what rpm does the engine idle at?
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      Reading through the engine service manual their advice is do a cylinder balance test. Unplug one injector at a time and see if the idle drops a consistent RPM. You can also do this using a Consult cable which is easier. They also call for unplugging the power transistor, then with the engine off and the fuel rail unhooked from the manifold verifying that you have good fuel flow (even injection, no dripping/leaks, etc) when you twist the CAS by hand. Also verify the spark by pulling the spark plugs and allowing the plugs to ground and turning the CAS by hand. I would also start doing the sensor checks and idle valve checks in service manual. Make sure the MAF tests reasonably, the intake air regulator is sane, etc. You may have to get new spark plugs.
    • Dose Pipe Sutututu
      Valve clearance for RB25det series 2

      By Dose Pipe Sutututu · Posted

      This sounds very old of me, however since buying the Tiguan shit box, my view on shit boxes have changed.
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
×
×
  • Create New...