Jump to content
SAU Community

Rb26 Jun 2.7l Stroker Kit In N1 Block, T88-38gk Turbo

SRB
 Share

Recommended Posts

SRB Veteran

SRB

Posted
Posted

selling my 2.7 jun stroker kit, was purchased from crd about a year or so ago, has only seen about 200km MAX street driving and some power runs on the dyno.

car had electrical issues, sat in the workshop for ages, and in the meantime i came across a os giken rb30, so im putting that in instead...

comes completely assembled, in a N1 block, the block doesnt have engine numbers stamped on it, as its a N1 block and they come blank and i never bothered to have my original one stamped in....

it revs very hard and makes the power with the right setup

i paid 9000 for the kit, obviously wen the dollar was a bit better... block was brand new, 2500, and assembly and machining 1500, so all up it owes me 13000,

looking for around $11,000

http://www.junauto.co.jp/products/cylinder...ft/rb26.html?en

http://www.nengun.com/jun/stroker-kit-nissan-rb26dett-27l

also selling my turbo which is the same age and km, so basically used but in as new condition

exhaust housing has been double ceramic coated as has the centre piece. compressor housing has been polished, all up cost me $700

i made 565awkw 23psi pump fuel with this setup, so it does work haha

looking for $3500 for the turbo

pics coming soon!!!

pm any interest/enquiries

  • 3 weeks later...
  • 1 month later...
  • 2 weeks later...
  • 2 weeks later...
NismoSTune Community Regular

NismoSTune

Posted
Posted
pms replied and sent

Extremely interested in the bottom end. Sadly, I'm in Canada so it would have to be shipped over seas. I do have an N1 water pump but no tomei pump yet so that would have to be on. What is the oil pan, OEM? Could you PM a list of possibilities for included parts and different prices? What was the compression numbers when the engine was pulled.

Thanks!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...